Bt traffic mon
jekhor·bluetooth-traffic-mon·kicad/bt-traffic-mon.kicad_pcb
About the Bt traffic mon PCB
Bt traffic mon is an open source PCB design by jekhor, published on GitHub. It is a 2-layer board measuring 120 × 110.5 mm, with 155 components from 63 distinct parts.
By type, the board carries 69 resistors, 21 capacitors, 9 LEDs, 7 inductors, 4 modules and 3 crystals.
It belongs with the iot & wireless designs in this gallery.
From the project
Researching of traffic monitoring by Bluetooth scanning
Bt traffic mon bill of materials (BOM)
155 components, 63 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SE-IMX287-MICRO | SE-iMX287-Micro | M1 |
| 1 | SIM68V | SIM68V | M2 |
| 1 | SIM900R | SIM900 | M3 |
| 1 | WT11I | WT11i | M4 |
| 1 | USB-A-DUAL | CONN_usb_Ax2 | X1 |
| 1 | SDCARD | SMD_SOCKET_SDCARD_SD-03 | X2 |
| 1 | 47388-2001 | 47388-2001 | X3 |
| 2 | TPS2051 | SMD_SO8N_50_150 | DA1, DA2 |
| 2 | PSR05 | SMD_SOT143 | DA3, DA4 |
| 1 | LM75A | SMD_SO8N_50_150 | DA5 |
| 1 | MIC29302BU(WU) | SMD_TO263_5 | DA6 |
| 1 | LM2596-5.0 | SMD_TO263_5 | DA7 |
| 1 | MIC29150-3.3BU(WU) | SMD_TO263-3 | DA8 |
| 1 | ESDA6V1W5 | SOT-353 | DA9 |
| 1 | MAX3483E | SMD_SO8N_50_150 | DD1 |
| 1 | GB_BAT | DISCRET_BAT_CR2032V | GB1 |
| 1 | DIP_SW4 | DIP-8__300 | S1 |
| 1 | SB_1-2 | SMD_SWT_push | SB1 |
| 4 | B340A | SMD_DO214AC_SMA | VD1, VD2, VD4, VD5 |
| 1 | SK35/MBRS360 | SMD_DO214AB_SMC | VD3 |
Show 43 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SL02 | SMD_DO219AB | VD6 |
| 3 | 1SS357 | SMD_SOD323_W | VD7, VD8, VD9 |
| 2 | IRLML6402TRPBF | SMD_SOT23_3 | VT1, VT2 |
| 6 | BC846 | SMD_SOT23_3 | VT3, VT4, VT5, VT6, VT7, VT8 |
| 1 | XP_CONN_18_M | CONN_PLD-18 | XP1 |
| 1 | XP_CONN_04_M | CONN_PLS-4 | XP2 |
| 2 | XP_CONN_20_M | CONN_PLD-20 | XP3, XP6 |
| 2 | XP_CONN_10_M | CONN_BH-10 | XP4, XP7 |
| 1 | XP_CONN_08_M | CONN_PLD-8 | XP5 |
| 1 | HR911105A | CONN_RJ45ETH | XS1 |
| 2 | XS_CONN_02_F | CONN_TERM_2p | XS2, XS3 |
| 2 | U.FL | u.FL | XW1, XW2 |
| 9 | HL_LED | SMD_Led_0603 | HL1, HL2, HL3, HL4, HL5, HL6, HL7, HL8 +1 |
| 3 | L_IND_CORE | SMD_IND_0805 | L1, L3, L4 |
| 1 | 47 uH L39 | DISCRET_IND_Toroid_8x16mm_V | L2 |
| 1 | 22 nH | SMD_IND_0603 | L5 |
| 2 | 10nH | SMD_IND_0603 | L6, L7 |
| 2 | 10n | SMD_C_0603 | C1, C2 |
| 1 | 100n | SMD_C_0603 | C3 |
| 2 | 100uF | SMD_c_tant_C | C4, C12 |
| 3 | 1uF | SMD_C_0603 | C5, C9, C13 |
| 1 | 330uF | SMD_c_tant_C | C6 |
| 3 | 0,1uF | SMD_C_0603 | C7, C11, C15 |
| 1 | 680uF | CP_R_100_2 | C8 |
| 1 | 330uF | SMD_c_tant_E | C10 |
| 1 | 330uF | SMD_c_tant_D | C14 |
| 1 | 4,7 uF | SMD_C_0603 | C16 |
| 3 | 0,1 uF | SMD_C_0603 | C17, C18, C21 |
| 2 | 15 | SMD_C_0603 | C19, C20 |
| 12 | 47K | SMD_R_0603 | R1, R3, R17, R18, R19, R20, R48, R49 +4 |
| 8 | 12K | SMD_R_0603 | R2, R4, R5, R6, R11, R12, R13, R14 |
| 4 | 50 | SMD_R_0603 | R7, R8, R9, R10 |
| 3 | 560 | SMD_R_0603 | R15, R16, R69 |
| 2 | 2,2K | SMD_R_0603 | R21, R22 |
| 11 | 1K | SMD_R_0603 | R23, R25, R26, R37, R38, R39, R40, R42 +3 |
| 8 | 4,7K | SMD_R_0603 | R24, R44, R45, R46, R47, R58, R63, R66 |
| 4 | 1,5K | SMD_R_0603 | R27, R28, R29, R31 |
| 9 | 10K | SMD_R_0603 | R30, R32, R33, R34, R35, R36, R50, R51 +1 |
| 1 | 100K | SMD_R_0603 | R41 |
| 1 | 43K | SMD_R_0603 | R43 |
| 1 | RES | SMD_R_0603 | R54 |
| 2 | 100 | SMD_R_0603 | R55, R57 |
| 3 | 22 | SMD_R_0603 | R59, R60, R62 |
Bt traffic mon design files
The KiCad project lives in the jekhor/bluetooth-traffic-mon repository on GitHub; these links point at the commit this page was built from.
Bt traffic mon: common questions
How big is the Bt traffic mon PCB?
The Bt traffic mon measures 120 × 110.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bt traffic mon?
155 components, from 63 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Bt traffic mon design files?
From the jekhor/bluetooth-traffic-mon repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Bt traffic mon design in my own project?
The repository has no license, so all rights stay with jekhor. Use it as a reference, and ask the author before reusing the design.
More boards in bluetooth-traffic-mon
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kL0 USB
Luos-io
20.3 × 15.3 mm19 parts2LMIT547Breakout board
Luos-io
26.7 × 27.9 mm29 parts2LMIT547Stm32f0 disco Luos shield
Luos-io
55.9 × 99.1 mm26 parts2LMIT547L0 USBA
Luos-io
20.3 × 15.3 mm19 parts2LMIT547