Headunit controls
About the Headunit controls PCB
Headunit controls is an open source PCB design by Jimbo145, published on GitHub. It is a 2-layer board measuring 59.3 × 84.3 mm, with 15 components from 8 distinct parts.
By type, the board carries 3 resistors, 2 connectors, 2 jumpers and 1 capacitor.
From the project
Integrates Ibus and LCD connections to Cat V cables for routing out of ICM
Integrates Ibus and LCD connections to Cat V cables for routing out of ICM
Pi4 mounting, Lifepowered, Microphone module, power input
Parts list Raspberry Pi LCD 3.5inch touchscreen 480*800 capacitive lifepo4wered-pi+ Can Bus Module Mcp2515
leighleighleigh Patrick Van Oosterwijck and LiFePO4wered Trionic Tuning
Headunit controls bill of materials (BOM)
15 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x06 | SaabConnector_6 | J1 |
| 1 | Conn_01x08 | SaabConnector_8 | J2 |
| 3 | SIP-1A05 | SIP1A05 | Am/fm_button1, CD_relay1, Scan_relay1 |
| 4 | MountingHole_Pad | SaabBTR | BTR_1, BTR_2, BTR_3, VOL_1 |
| 2 | SolderJumper_2_Bridged | SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP1, JP2 |
| 1 | C | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 2 | 680 Ohm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
Headunit controls design files
The KiCad project lives in the Jimbo145/SaabHeadUnit repository on GitHub; these links point at the commit this page was built from.
Headunit controls: common questions
How big is the Headunit controls PCB?
The Headunit controls measures 59.3 × 84.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Headunit controls?
15 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Headunit controls design files?
From the Jimbo145/SaabHeadUnit repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Headunit controls design in my own project?
The repository has no license, so all rights stay with Jimbo145. Use it as a reference, and ask the author before reusing the design.
