Rladder
jkominek·adcstudy·rladder/rladder.kicad_pcb
About the Rladder PCB
Rladder is an open source PCB design by jkominek, published on GitHub under the Custom license license. It is a 2-layer board measuring 53.6 × 37.5 mm, with 14 components from 5 distinct parts.
Other key parts include the MIC5366-2.0YC5-TR. By type, the board carries 9 resistors, 3 capacitors, 1 IC and 1 connector.
From the project
PCBs for studying some ADCs & analog frontends
A set of kicad 8 boards for investigating various combinations of ADC and analog frontend for my piano conversion project.
There might be some errors and problems with them, but I'm not currently aware of any issues.
The ADC boards are designed to plug into a Glasgow Interface Explorer, but that's done via 2.54mm pin headers, so you can hook them up to anything with some jumper wires. The Glasgow header has the various digital signals necessary for the board, and provides VDD. (Which the Glasgow can adjust.) Whichever of my applets are complete-enough are available in my fork of the Glasgow…
Main components on the Rladder
Rladder bill of materials (BOM)
14 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MIC5366-2.0YC5-TR | SOT-353_SC-70-5 | U3 |
| 1 | ToADC | PinSocket_2x10_P2.54mm_Vertical | J1 |
| 2 | 1uF X7R | C_0805_2012Metric | C1, C2 |
| 1 | 10nF NP0 | C_0805_2012Metric | C3 |
| 9 | 1k | R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8 +1 |
Rladder design files
The KiCad project lives in the jkominek/adcstudy repository on GitHub; these links point at the commit this page was built from.
- Layoutrladder/rladder.kicad_pcb
- Schematicrladder/rladder.kicad_sch
Rladder: common questions
How big is the Rladder PCB?
The Rladder measures 53.6 × 37.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rladder?
14 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rladder design files?
From the jkominek/adcstudy repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Rladder design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.