Aa input controller
jlunder·amanita-arcade·hardware/aa-input-controller/aa-input-controller.kicad_pcb
About the Aa input controller PCB
Aa input controller is an open source STM32 PCB design by jlunder, published on GitHub. It is a 2-layer board measuring 95.4 × 54 mm, with 58 components from 31 distinct parts.
Its main chip is the STM32F103_Bluepill, from the STM32 family. Other key parts include the LM7805_TO220. By type, the board carries 24 test points, 13 resistors, 8 connectors, 5 capacitors, 4 transistors and 1 IC.
Main components on the Aa input controller
Aa input controller bill of materials (BOM)
58 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM7805_TO220 | TO-220-3_Horizontal_TabDown | U101 |
| 1 | STM32F103_Bluepill | Maple_Mini | A201 |
| 4 | MCH3484 | SOT-323_SC-70 | Q211, Q221, Q231, Q241 |
| 1 | INPUT | 6P6C_Assmann_A-2014-1-4 | CN201 |
| 1 | Connector_Sony_Playstation_DualShock_Female | Connector_SonyPS2DualShock_Female | CN202 |
| 2 | Conn_01x06_Male | PinHeader_1x06_P2.54mm_Vertical | CN203, CN251 |
| 1 | BTN_R | 6P6C_Assmann_A-2014-1-4 | CN211 |
| 1 | BTN_G | 6P6C_Assmann_A-2014-1-4 | CN221 |
| 1 | BTN_B | 6P6C_Assmann_A-2014-1-4 | CN231 |
| 1 | BTN_P | 6P6C_Assmann_A-2014-1-4 | CN241 |
| 2 | Fiducial | StencilAlignment_1.27mm | FD5, FD6 |
| 1 | +12V | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP101 |
| 1 | +5V | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP102 |
| 10 | GND | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP151, TP152, TP251, TP252, TP253, TP254, TP261, TP271 +2 |
| 1 | BTN_R | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP211 |
| 1 | PWM_R | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP212 |
| 1 | LED_R | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP213 |
| 1 | BTN_G | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP221 |
| 1 | PWM_G | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP222 |
| 1 | LED_G | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP223 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BTN_B | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP231 |
| 1 | PWM_B | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP232 |
| 1 | LED_B | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP233 |
| 1 | BTN_P | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP241 |
| 1 | PWM_P | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP242 |
| 1 | LED_P | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP243 |
| 1 | 10u | CP_Radial_D10.0mm_P2.50mm_P5.00mm | C101 |
| 4 | 1u | C_0805_2012Metric | C211, C221, C231, C241 |
| 6 | 1k | R_0603_1608Metric | R201, R208, R211, R221, R231, R241 |
| 2 | 120 | R_0603_1608Metric | R202, R209 |
| 5 | 4.7k | R_0603_1608Metric | R203, R204, R205, R206, R207 |
Aa input controller design files
The KiCad project lives in the jlunder/amanita-arcade repository on GitHub; these links point at the commit this page was built from.
Aa input controller: common questions
What microcontroller does the Aa input controller use?
The Aa input controller is built around the STM32F103_Bluepill, from the STM32 family.
How big is the Aa input controller PCB?
The Aa input controller measures 95.4 × 54 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Aa input controller?
58 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the Aa input controller design files?
From the jlunder/amanita-arcade repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Aa input controller design in my own project?
The repository has no license, so all rights stay with jlunder. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Aa input controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in amanita-arcade
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k