DCLK
joebmz98·DCLK·build/DCLK-MIDI-Clock/DCLK-MIDI-Clock.kicad_pcb
About the DCLK PCB
DCLK is an open source STM32 PCB design by joebmz98, published on GitHub under the MIT license. It is a 2-layer board measuring 125 × 213 mm, with 43 components from 23 distinct parts.
Its main chip is the Z_module_black_pill_STM32F411, from the STM32 family. Other key parts include the C2652106 and C155176. By type, the board carries 18 resistors, 10 capacitors, 7 connectors, 4 diodes and 3 ICs.
It belongs with the audio designs in this gallery.
From the project
Dual MIDI Clock based on the Sim'n Tonic Nome II
.axs instruments · Firmware v1.0 · Hardware v1.0
DCLK is a dual MIDI clock built around an STM32F411 Black Pill. It sends MIDI clock to two TRS (Type A) outputs and over USB MIDI, with quantised start/stop and a separate clock divider for each output, so two machines can be dropped in and out of a jam on the bar.
Flash the latest release straight from Chrome or Edge on a computer. No software to install. Your saved settings are kept. Flasher source: DCLK-Flasher.
Main components on the DCLK
DCLK bill of materials (BOM)
43 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | Z_module_black_pill_STM32F411 | U1 |
| 1 | C2652106 CAP1206-x-SL | SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | C155176 74AHCT125 | SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 2 | MIDI OUT | Jack_3.5mm_CUI_SJ1-3525N_Horizontal_edit | J1, J3 |
| 1 | Jack-DC | BarrelJack_GCT_DCJ200-10-A_Horizontal | J2 |
| 1 | C54907661 Conn_02x04_Odd_Even | PinSocket_2x04_P2.54mm_Vertical | J5 |
| 1 | C41397153 Conn_02x04_Odd_Even | PinHeader_2x04_P2.54mm_Vertical_SMD | J6 |
| 1 | SYNC 1 OUT | PJ307-TRS-SOCKET | J7 |
| 1 | SYNC 2 OUT | PJ307-TRS-SOCKET | J8 |
| 1 | ~ | SSD1306-128x32 | SSD1306 |
| 1 | C19167 BAT43 | D_SOD-123 | D1 |
| 3 | LED | LED_D5.0mm | D2, D3, D4 |
| 3 | C24497 100nF | C_1206_3216Metric | C1, C6, C10 |
| 2 | C13585 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C4 |
| 1 | C24497 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 1 | 100uF | CP_Radial_D4.0mm_P1.50mm | C5 |
| 3 | C1846 10nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7, C8, C9 |
| 4 | C23140 33R Yageo | R_0603 | R1, R2, R3, R4 |
| 2 | C23162 4k7 Yageo | R_0603 | R5, R6 |
| 3 | C22104 330R Yageo | R_0603 | R7, R8, R9 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C15401 10k Yageo | R_0603 | R10 |
| 4 | C25530 100k | R_0402_1005Metric | R11, R12, R13, R14 |
| 4 | C11702 1k | R_0402_1005Metric | R15, R16, R17, R18 |
DCLK design files
The KiCad project lives in the joebmz98/DCLK repository on GitHub; these links point at the commit this page was built from.
DCLK: common questions
What microcontroller does the DCLK use?
The DCLK is built around the Z_module_black_pill_STM32F411, from the STM32 family.
How big is the DCLK PCB?
The DCLK measures 125 × 213 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DCLK?
43 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DCLK design files?
From the joebmz98/DCLK repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DCLK design in my own project?
Yes, under the terms of its MIT license, which joebmz98 chose for the repository.
Can I test firmware for the DCLK without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k