Led CCAT multiplexer
About the Led CCAT multiplexer PCB
Led CCAT multiplexer is an open source PCB design by jonahjlee, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 177.8 × 50.8 mm, with 14 components from 3 distinct parts.
From the project
CAD files for CCAT 850GHz LED mapping array PCB & peripherals
This project contains various cad files relating to hardware required to perform LED mapping for CCAT's 850GHz module. This project includes the following directories: - ledmapper850 - The defining the PCB for one rhombus of the LED mapper array. Contains the KiCAD project and some Python programs used to automate the LED/via/track layout. - multiplexer - NO LONGER USED - The cable splitter used between the Arduino shield and the mapper array. Splits the inputs into 13 parallel 24-pin connectors. Since the PCB has been updated to use a single connector, this is no longer relevant to the…
Led CCAT multiplexer bill of materials (BOM)
14 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_02X12_TOP_BOTTOM Conn_02x12_Top_Bottom | PinSocket_2x12_P2.54mm_Vertical | J1 |
| 12 | Conn_02x12_Top_Bottom | PinSocket_2x12_P2.54mm_Vertical | J2, J3, J4, J5, J6, J7, J8, J9 +4 |
| 1 | DB25_Female_MountingHoles | 25_pin_micro_D_male_straight_mount_pdb_wide_spacing | J14 |
Led CCAT multiplexer design files
The KiCad project lives in the jonahjlee/ccat-led-mapping repository on GitHub; these links point at the commit this page was built from.
Led CCAT multiplexer: common questions
How big is the Led CCAT multiplexer PCB?
The Led CCAT multiplexer measures 177.8 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Led CCAT multiplexer?
14 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Led CCAT multiplexer design files?
From the jonahjlee/ccat-led-mapping repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Led CCAT multiplexer design in my own project?
Yes, under the terms of its GPL-3.0 license, which jonahjlee chose for the repository.
