Led mapper 850 mirrored
About the Led mapper 850 mirrored PCB
Led mapper 850 mirrored is an open source PCB design by jonahjlee, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 116.1 × 67 mm, with 2117 components from 2 distinct parts.
By type, the board carries 2116 diodes and 1 connector.
From the project
CAD files for CCAT 850GHz LED mapping array PCB & peripherals
This project contains various cad files relating to hardware required to perform LED mapping for CCAT's 850GHz module. This project includes the following directories: - ledmapper850 - The defining the PCB for one rhombus of the LED mapper array. Contains the KiCAD project and some Python programs used to automate the LED/via/track layout. - multiplexer - NO LONGER USED - The cable splitter used between the Arduino shield and the mapper array. Splits the inputs into 13 parallel 24-pin connectors. Since the PCB has been updated to use a single connector, this is no longer relevant to the…
Led mapper 850 mirrored bill of materials (BOM)
2117 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_02X12_TOP_BOTTOM Conn_02x12_Top_Bottom | PinSocket_2x12_P2.54mm_Vertical_SMD_custom | J1 |
| 2116 | LED | LED_0201_0603Metric_XINGLIGHT | D1, D2, D3, D4, D5, D6, D7, D8 +2108 |
Led mapper 850 mirrored design files
The KiCad project lives in the jonahjlee/ccat-led-mapping repository on GitHub; these links point at the commit this page was built from.
Led mapper 850 mirrored: common questions
How big is the Led mapper 850 mirrored PCB?
The Led mapper 850 mirrored measures 116.1 × 67 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Led mapper 850 mirrored?
2117 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Led mapper 850 mirrored design files?
From the jonahjlee/ccat-led-mapping repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Led mapper 850 mirrored design in my own project?
Yes, under the terms of its GPL-3.0 license, which jonahjlee chose for the repository.
