Simon pocket
JorisBar·Simon_pocket·PCB/Standard/Simon_pocket.kicad_pcb
About the Simon pocket PCB
Simon pocket is an open source STM32 PCB design by JorisBar, published on GitHub. It is a 2-layer board measuring 27 × 27 mm, with 36 components from 15 distinct parts.
Its main chip is the STM32F030C6TX, from the STM32 family. By type, the board carries 13 resistors, 10 capacitors, 4 switches, 4 diodes, 2 jumpers and 1 IC.
From the project
A pocket version of the classic Simon says game
Simonpocket is a pocket sized memory training game. Players have to repeat a button sequence that gets longer each round. This project includes a custom PCB, bare metal programming for an STM32 MCU and a 3D printed housing.**
- Microcontroller: The STM32F030C6T6 was chosen for being inexpensive (0.5€ @ 30+ Qty) and having good documentation and support. - Battery: The CR2032 was selected because of the 3V nominal voltage, compact size and availability. - Sound system: Buzzers/speakers had to be omitted due to the high internal resistance of the battery. - Power on: Due to space constraints…

Main components on the Simon pocket
Simon pocket bill of materials (BOM)
36 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F030C6TX STM32F030C6Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | PMOS | SOT-23 | Q1 |
| 1 | CR2032 Battery_Cell | CR2032 slim holder | BT1 |
| 2 | Jumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 4 | SW_Push | SW_Push mini square HansElectricity C22375378 | SW1, SW2, SW3, SW4 |
| 1 | RED | LED_0603_1608Metric | D1 |
| 1 | GREEN | LED_0603_1608Metric | D2 |
| 1 | BLUE | LED_0603_1608Metric | D3 |
| 1 | YELLOW | LED_0603_1608Metric | D4 |
| 1 | 10U 10u | C_0603_1608Metric | C1 |
| 9 | 100N 100n | C_0603_1608Metric | C2, C3, C4, C5, C6, C7, C8, C9 +1 |
| 5 | 10K 10k | R_0603_1608Metric | R1, R2, R3, R4, R5 |
| 4 | 1k | R_0603_1608Metric | R6, R7, R8, R9 |
| 3 | 330 | R_0603_1608Metric | R10, R12, R13 |
| 1 | 1.5K 1.5k | R_0603_1608Metric | R11 |
Simon pocket design files
The KiCad project lives in the JorisBar/Simon_pocket repository on GitHub; these links point at the commit this page was built from.
Simon pocket: common questions
What microcontroller does the Simon pocket use?
The Simon pocket is built around the STM32F030C6TX, from the STM32 family.
How big is the Simon pocket PCB?
The Simon pocket measures 27 × 27 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Simon pocket?
36 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Simon pocket design files?
From the JorisBar/Simon_pocket repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Simon pocket design in my own project?
The repository has no license, so all rights stay with JorisBar. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Simon pocket without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Simon_pocket
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k