PCB uartImplement STM32

Jubair-094·PCB_uartImplement_STM32·uart/uart.kicad_pcb

PCB uartImplement STM32 layout, top view — open source STM32 board by Jubair-094

About the PCB uartImplement STM32

PCB uartImplement STM32 is an open source STM32 PCB design by Jubair-094, published on GitHub. It is a 2-layer board measuring 118 × 75 mm, with 20 components from 3 distinct parts.

Its main chip is the STM32F103C6Tx, from the STM32 family. By type, the board carries 16 resistors and 2 connectors.

From the project

1. Here, Kicad files are given. "uart.kicad_sch". This file contains a schematic. Directly opening it will open the schematic editor

1. Here, Kicad files are given. "uart.kicad_sch". This file contains a schematic. Directly opening it will open the schematic editor

2."uart.kicad_pcb" contains the layout design. Here, all the routing is implemented. This is a 2-layer PCB, and by going to 3d view, can see the physical view of the PCB

This folder contains the information related to printing the PCB. Zip the GerberFile and can upload to the website (like 'PCBWay') to print the UART PCB board

PCB uartImplement STM32 bill of materials (BOM)

20 components, 3 distinct parts.

QtyPartRefs
2
Conn_01x05
J1, J2
2
STM32F103C6Tx
STM32F103C8, STM32f103C8
16
R
R1, R2, R3, R4, R5-S2, R6-S2, R7-S2, R8-S2 +8

PCB uartImplement STM32 design files

The KiCad project lives in the Jubair-094/PCB_uartImplement_STM32 repository on GitHub; these links point at the commit this page was built from.

PCB uartImplement STM32: common questions

What microcontroller does the PCB uartImplement STM32 use?

The PCB uartImplement STM32 is built around the STM32F103C6Tx, from the STM32 family.

How big is the PCB uartImplement STM32?

The PCB uartImplement STM32 measures 118 × 75 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCB uartImplement STM32?

20 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the PCB uartImplement STM32 design files?

From the Jubair-094/PCB_uartImplement_STM32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the PCB uartImplement STM32 design in my own project?

The repository has no license, so all rights stay with Jubair-094. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PCB uartImplement STM32 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards