HardLabs

Projet-S6

Juliexiaoni·Projet-S6·Projet S6 Bis/Projet S6.kicad_pcb

Projet-S6 PCB layout, top view — open source AVR/Arduino board by Juliexiaoni

About the Projet-S6 PCB

Projet-S6 is an open source AVR/Arduino PCB design by Juliexiaoni, published on GitHub. It is a 2-layer board measuring 165 × 23.2 mm, with 28 components from 7 distinct parts.

Its main chip is the Arduino_Nano, from the AVR/Arduino family. Other key parts include the AZ1117-3.3. By type, the board carries 11 diodes, 11 resistors, 2 connectors, 2 capacitors and 1 IC.

From the project

Horloge tournante à persistence rétinienne

Horloge tournante à persistence rétinienne

Simuler une horloge analogique dynamique ## Planning prévisionnel

Définir les objectif (taille, résolution, affichage prévu):

Choix des composantes (STM32, moteur, alimentation) Réaliser schéma électronique et mécanique Déterminer la fréquence de rotation optimale

Une barrette de douze leds et le code sur le sTM32 Branchement et alimentation puis … Pour faire une test avec l’ancien plaquette/moteur du projet

Main components on the Projet-S6

AZ1117-3.3

Projet-S6 bill of materials (BOM)

28 components, 7 distinct parts.

QtyPartRefs
1
AZ1117-3.3
U1
1
Conn_01x03_Pin
J1
1
Conn_01x02
J101
1
~
Nucleo2
11
LED
D1, D2, D3, D4, D5, D6, D7, D8 +3
2
C
C1, C2
11
220
R1, R2, R3, R4, R5, R6, R7, R8 +3

Projet-S6 design files

The KiCad project lives in the Juliexiaoni/Projet-S6 repository on GitHub; these links point at the commit this page was built from.

Projet-S6: common questions

What microcontroller does the Projet-S6 use?

The Projet-S6 is built around the Arduino_Nano, from the AVR/Arduino family.

How big is the Projet-S6 PCB?

The Projet-S6 measures 165 × 23.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Projet-S6?

28 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Projet-S6 design files?

From the Juliexiaoni/Projet-S6 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Projet-S6 design in my own project?

The repository has no license, so all rights stay with Juliexiaoni. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Projet-S6 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards