ModuleV450

stuartpittaway·diyBMSv4·ModuleV450/ModuleV450.kicad_pcb

About the ModuleV450 PCB

ModuleV450 is an open source AVR/Arduino PCB design by stuartpittaway, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 30 × 61.4 mm, with 39 components from 26 distinct parts.

Its main chip is the ATTINY1624-SSU, from the AVR/Arduino family. Other key parts include the EL3H7(B)(TA)-G. By type, the board carries 21 resistors, 4 diodes, 2 ICs, 2 connectors, 2 capacitors and 1 transistor.

It belongs with the power & battery designs in this gallery, and the repository also holds 2 earlier revisions of it.

From the project

Version 4 of the diyBMS

Do it yourself battery management system for Lithium ion battery packs/cells

More discussion Open Energy Monitor Forum

If you are looking for version 3 (obsolete) of this project take a look here

THIS REPOSITORY CONTAINS THE HARDWARE FOR THE SYSTEM

If you order a PCB, please use my affiliate link to help support this project JLCPCB

If you find the BMS useful, please consider buying me a beer, check out Patron for more information

ModuleV450, from the project README — From the project README

Main components on the ModuleV450

EL3H7(B)(TA)-G ATTINY1624-SSU

ModuleV450 bill of materials (BOM)

39 components, 26 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	EL3H7(B)(TA)-G	SOP-4_4.4x2.6mm_P1.27mm	U1
1	ATTINY1624-SSU ATTINY1624-SSU-ND	SOIC-14_3.9x8.7mm_P1.27mm	U2
1	AO3400A	SOT-23	Q1
1	J	PinSocket_1x02_P2.54mm_Vertical	J1
1	Comms	PhoenixContact_MC_1,5_4-G-3.81_1x04_P3.81mm_Horizontal	J2
1	Ext Temp Sensor	JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal	EXTTEMP1
1	MSMD150 mSMD150	Fuse_1812_4532Metric	F1
1	Battery	JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal	POWER1
1	Battery	PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal	POWER2
1	RX Connector	JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal	RX1
1	TX Connector	JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal	TX1
1	UPDI	PinSocket_1x03_P2.54mm_Vertical	UPDI1
1	AZ432ANTR-E1	SOT-23	D1
1	SMBJ5.0A	D_SMB	D2
1	Red	LED_0805_2012Metric	D3
1	Blue	LED_0603_1608Metric	D4
1	100NF 100nF	C_0805_2012Metric	C1
1	10UF 10uF	C_0805_2012Metric	C2
1	100K	R_0805_2012Metric	R1
1	1KOHMS	R_0805_2012Metric	R2

Show 6 more

Qty	Part	Footprint	Refs
1	180R	R_0805_2012Metric	R5
9	3R	R_2010_5025Metric	R6, R8, R10, R22, R24, R25, R26, R27 +1
1	510OHMS	R_0805_2012Metric	R14
3	10KOHMS	R_0805_2012Metric	R15, R20, R21
3	2K2	R_0805_2012Metric	R16, R17, R18
2	CMFB103F3950FANT	R_0805_2012Metric	R19, R23

ModuleV450 design files

The KiCad project lives in the stuartpittaway/diyBMSv4 repository on GitHub; these links point at the commit this page was built from.

ModuleV450: common questions

What microcontroller does the ModuleV450 use?

The ModuleV450 is built around the ATTINY1624-SSU, from the AVR/Arduino family.

How big is the ModuleV450 PCB?

The ModuleV450 measures 30 × 61.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ModuleV450?

39 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ModuleV450 design files?

From the stuartpittaway/diyBMSv4 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the ModuleV450 design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

Can I test firmware for the ModuleV450 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.