HardLabs

Splave ferris choc v1 left

jusdisgi·splave-ferris·splave-ferris_choc_v1/splave-ferris_choc_v1_left.kicad_pcb

Splave ferris choc v1 left PCB layout, top view — open source board by jusdisgi

About the Splave ferris choc v1 left PCB

Splave ferris choc v1 left is an open source PCB design by jusdisgi, published on GitHub. It is a 2-layer board measuring 130.2 × 101.2 mm, with 21 components from 5 distinct parts.

By type, the board carries 17 diodes, 1 IC, 1 connector and 1 transformer.

It belongs with the keyboards and iot & wireless designs in this gallery.

From the project

Simple 34-key split ergonomic keyboard running ZMK on a Seeed XIAO BLE controller and supporting multiple switch types. Similar in layout to the Ferris Sweep except with a bit of finger splay.

My goals are to make the keyboard as small and thin as possibe while remaining comfortable, efficient, and relatively durable. That is the main rationale for not using hotswap switches; in addition to adding a bit of height, it makes the keys much less secure if you aren't using a case of some kind. I intend to plastidip the bottom and otherwise leave it raw.

Splave ferris choc v1 left, from the project README
From the project README

Splave ferris choc v1 left bill of materials (BOM)

21 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
—
MCU1
1
—
JST1
1
—
B1
1
—
T1
17
—
D1, D2, D3, D4, D5, D6, D7, D8 +9

Splave ferris choc v1 left design files

The KiCad project lives in the jusdisgi/splave-ferris repository on GitHub; these links point at the commit this page was built from.

Splave ferris choc v1 left: common questions

How big is the Splave ferris choc v1 left PCB?

The Splave ferris choc v1 left measures 130.2 × 101.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Splave ferris choc v1 left?

21 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Splave ferris choc v1 left design files?

From the jusdisgi/splave-ferris repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Splave ferris choc v1 left design in my own project?

The repository has no license, so all rights stay with jusdisgi. Use it as a reference, and ask the author before reusing the design.

More boards in splave-ferris

Similar boards