HardLabs

Project phoenix web

karthickraja2371-rgb·project-phoenix-web·hardware/PCB-PHX-ELBOW-002.kicad_sch

This repository ships a schematic but no board layout.

About the Project phoenix web PCB

Project phoenix web is an open source STM32 PCB design by karthickraja2371-rgb, published on GitHub under the MIT license. It is a board, with 2 components from 2 distinct parts.

Its main chip is the STM32H753VIT6, from the STM32 family. Other key parts include the DRV8323RS.

It belongs with the robotics & motion and sensors designs in this gallery.

From the project

Designed and Developed by ## R. Karthick Raja

Designed and Developed by ## R. Karthick Raja

"Engineering independence through intelligent prosthetics."

🌐 Live Digital Twin: cheery-duckanoo-141cba.netlify.app 🐙 GitHub Repository: github.com/karthickraja2371-rgb/project-phoenix-dashboard

PROJECT PHOENIX is an assistive robotics project focused on developing an autonomous myoelectric prosthetic system specifically for transhumeral amputees with skin-grafted residual limbs.

Main components on the Project phoenix web

STM32H753VIT6DRV8323RS

Project phoenix web bill of materials (BOM)

2 components, 2 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32H753VIT6
U401
1
DRV8323RS
U501

Project phoenix web design files

The KiCad project lives in the karthickraja2371-rgb/project-phoenix-web repository on GitHub; these links point at the commit this page was built from.

Project phoenix web: common questions

What microcontroller does the Project phoenix web use?

The Project phoenix web is built around the STM32H753VIT6, from the STM32 family.

How many components are on the Project phoenix web?

2 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Project phoenix web design files?

From the karthickraja2371-rgb/project-phoenix-web repository on GitHub, which has the schematic, a netlist and the BOM; the links under Design files point to each one.

Can I use the Project phoenix web design in my own project?

Yes, under the terms of its MIT license, which karthickraja2371-rgb chose for the repository.

Can I test firmware for the Project phoenix web without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards