Flosspods 1 2 flex
About the Flosspods 1 2 flex PCB
Flosspods 1 2 flex is an open source PCB design by kenp-io, published on GitHub under the WTFPL license. It is a 2-layer board measuring 11.8 × 29.9 mm, with 13 components from 12 distinct parts.
Other key parts include the AS3616Afake, flosspods_1_2_LightningMainBoard, PD006 and JAE_DX07S016JA1R1500. By type, the board carries 5 resistors, 4 ICs, 3 capacitors and 1 diode.
From the project
Folder flosspods12flex contains the KiCad project if you want to order the PCB yourself. It works on Gen. 1 and Gen. 2 (both wired-only and wireless versions!). You need to generate the Gerber files yourself. There is an extra file called flosspods12flex-stiffener.jpg. It shows w
Folder flosspods12flex contains the KiCad project if you want to order the PCB yourself. It works on Gen. 1 and Gen. 2 (both wired-only and wireless versions!). You need to generate the Gerber files yourself. There is an extra file called flosspods12flex-stiffener.jpg. It shows where I've placed the stiffener for the connector. It's nice to have but not a requirement. You send that file to the board house along with your Gerber files. Here it was sent to PCBWay.
Main components on the Flosspods 1 2 flex
Flosspods 1 2 flex bill of materials (BOM)
13 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AS3616Afake | AS3616Afake | U1 |
| 1 | flosspods_1_2_LightningMainBoard | flosspods_1_2_LightningMainBoard | U2 |
| 1 | PD006 | PD006 | U3 |
| 1 | JAE_DX07S016JA1R1500 | JAE_DX07S016JA1R1500 | U4 |
| 1 | D | D_SOD-523 | D1 |
| 1 | 1 uF | C_0201_0603Metric | C1 |
| 1 | 10 nF | C_0201_0603Metric | C2 |
| 1 | 330 nF | C_0402_1005Metric | C3 |
| 1 | 150 | R_0201_0603Metric | R1 |
| 1 | 100k | R_0201_0603Metric | R2 |
| 1 | 1k | R_0201_0603Metric | R3 |
| 2 | 5.1k | R_0201_0603Metric | R4, R5 |
Flosspods 1 2 flex design files
The KiCad project lives in the kenp-io/not-for-airpods-repairs repository on GitHub; these links point at the commit this page was built from.
Flosspods 1 2 flex: common questions
How big is the Flosspods 1 2 flex PCB?
The Flosspods 1 2 flex measures 11.8 × 29.9 mm, has 2 copper layers and is 0.22 mm thick.
How many components are on the Flosspods 1 2 flex?
13 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Flosspods 1 2 flex design files?
From the kenp-io/not-for-airpods-repairs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Flosspods 1 2 flex design in my own project?
Yes, under the terms of its WTFPL license, which kenp-io chose for the repository.
