Flosspods pro flex
About the Flosspods pro flex PCB
Flosspods pro flex is an open source PCB design by kenp-io, published on GitHub under the WTFPL license. It is a 2-layer board measuring 24.3 × 57.9 mm, with 12 components from 12 distinct parts.
Other key parts include the C9419, flosspods_pro_LightningMainBoard and USBC_GT-USB-7022X. By type, the board carries 3 ICs, 3 capacitors, 3 resistors, 1 transistor, 1 LED and 1 diode.
From the project
Folder flosspods12flex contains the KiCad project if you want to order the PCB yourself. It works on Gen. 1 and Gen. 2 (both wired-only and wireless versions!). You need to generate the Gerber files yourself. There is an extra file called flosspods12flex-stiffener.jpg. It shows w
Folder flosspods12flex contains the KiCad project if you want to order the PCB yourself. It works on Gen. 1 and Gen. 2 (both wired-only and wireless versions!). You need to generate the Gerber files yourself. There is an extra file called flosspods12flex-stiffener.jpg. It shows where I've placed the stiffener for the connector. It's nice to have but not a requirement. You send that file to the board house along with your Gerber files. Here it was sent to PCBWay.
Main components on the Flosspods pro flex
Flosspods pro flex bill of materials (BOM)
12 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C9419 | C9419 | U1 |
| 1 | flosspods_pro_LightningMainBoard | flosspods_pro_LightningMainBoard | U2 |
| 1 | USBC_GT-USB-7022X | USBC_GT-USB-7022X | U3 |
| 1 | DMP2123L-7 | DMP2123L-7 | Q1 |
| 1 | LED_LRTB_R48G | LED_LRTB_R48G | LED1 |
| 1 | D | D_SOD-523 | D1 |
| 1 | 220n | C_0402_1005Metric | C1 |
| 1 | 47n | C_0402_1005Metric | C2 |
| 1 | 330n | C_0402_1005Metric | C3 |
| 1 | 100k | R_0402_1005Metric | R1 |
| 1 | 120 | R_0402_1005Metric | R2 |
| 1 | 5.1k | R_0402_1005Metric | R8 |
Flosspods pro flex design files
The KiCad project lives in the kenp-io/not-for-airpods-repairs repository on GitHub; these links point at the commit this page was built from.
Flosspods pro flex: common questions
How big is the Flosspods pro flex PCB?
The Flosspods pro flex measures 24.3 × 57.9 mm, has 2 copper layers and is 0.22 mm thick.
How many components are on the Flosspods pro flex?
12 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Flosspods pro flex design files?
From the kenp-io/not-for-airpods-repairs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Flosspods pro flex design in my own project?
Yes, under the terms of its WTFPL license, which kenp-io chose for the repository.
