Netzteilplatine

Kibabalu·power_current_source_load

Netzteilplatine PCB layout, top view — open source board by Kibabalu

About the Netzteilplatine PCB

Netzteilplatine is an open source PCB design by Kibabalu, published on GitHub. It is a 2-layer board measuring 159.9 × 99.9 mm, with 98 components from 41 distinct parts.

Other key parts include the LM317_TO-220 and LM337_TO220. By type, the board carries 32 capacitors, 14 resistors, 13 test points, 12 diodes, 8 transistors and 6 inductors.

From the project

power current source and load

The project consists of three PCBs: A general purpose power supply PCB, the control/supervise PCB and the main power PCB.

The power supply PCB gives a clean and stable +/- 15 V output voltage from a 'dirty' switching-mode power supply at its input. In detail it has the functions: - inverse-polarity protection - common mode disturbance filtering - low pass filtering with fg approx. 3 kHz (Pi-filter) - low pass filtering with fg approx. 1.5 Hz (RC-Filter with capacitance multiplier) - Voltage control of +/- 15 V, I_max approx. 1.5 A

Netzteilplatine, from the project README
From the project README

Main components on the Netzteilplatine

Netzteilplatine bill of materials (BOM)

98 components, 41 distinct parts.

QtyPartRefs
1
LM317_TO-220
U1
1
LM337_TO220
U2
1
IRLML9301
Q1
1
IRLML0030
Q2
4
BC847
Q3, Q4, Q5, Q6
1
TIP120
Q7
1
TIP125
Q8
1
Screw_Terminal_01x04
J1
2
Screw_Terminal_01x03
J2, J3
2
Conn_01x02_Male
J4, J5
2
Heatsink
HS1, HS2
2
Heatsink
HS3, HS4
2
5k
RV1, RV2
13
TestPoint
TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +5
2
BZX84Cxx
D1, D2
2
1.5KExxCA
D3, D4
2
LED
D5, D6
4
MRA4003T3G
D7, D8, D9, D10
2
1N5408
D11, D12
2
L_Core_Ferrite_Coupled_1243
L1, L2
Show 21 more
QtyPartRefs
4
100u
L3, L4, L5, L6
4
33u
C1, C2, C7, C8
4
330n
C3, C4, C9, C10
4
3n3
C5, C6, C11, C12
2
470u
C13, C14
2
4u7
C15, C16
2
47n
C17, C18
2
330u
C19, C20
2
3u3
C21, C22
2
33n
C23, C24
2
10u
C25, C26
2
1500u
C27, C28
2
15u
C29, C30
2
150n
C31, C32
2
100k
R1, R2
2
150k
R3, R4
2
4k7
R5, R6
2
100
R7, R8
2
220
R9, R10
2
1Meg
R11, R12
2
240
R13, R14

Netzteilplatine design files

The KiCad project lives in the Kibabalu/power_current_source_load repository on GitHub; these links point at the commit this page was built from.

Netzteilplatine: common questions

How big is the Netzteilplatine PCB?

The Netzteilplatine measures 159.9 × 99.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Netzteilplatine?

98 components, from 41 distinct parts. The full bill of materials is listed on this page.

Where can I download the Netzteilplatine design files?

From the Kibabalu/power_current_source_load repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Netzteilplatine design in my own project?

The repository has no license, so all rights stay with Kibabalu. Use it as a reference, and ask the author before reusing the design.