PWM Controller V2
About the PWM Controller V2 PCB
PWM Controller V2 is an open source PCB design by KitiliKisinguh, published on GitHub under the MIT license. It is a 2-layer board measuring 44 × 37 mm, with 18 components from 16 distinct parts.
Other key parts include the UCC23513QDWYRQ1, STP55NF06L and MC7815CDTRKG. By type, the board carries 6 resistors, 4 diodes, 4 capacitors, 3 ICs and 1 connector.
From the project
Headspace Sampling Device
Main components on the PWM Controller V2
PWM Controller V2 bill of materials (BOM)
18 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | UCC23513QDWYRQ1 | SOIC127P1150X355-6N | IC1 |
| 1 | STP55NF06L | TO254P1040X460X1935-3 | U1 |
| 1 | MC7815CDTRKG | DPAK229P990X238-4N | U2 |
| 1 | CONN_01X05_PIN Conn_01x05_Pin | PinSocket_1x05_P2.54mm_Vertical | J1 |
| 1 | KA-3528SGT | WL-SMTW_3528 | D1 |
| 1 | BZX84C15 DIODES INC. | SOT-23 | D2 |
| 1 | BZD27C24P R3G | SODFL3618X143N | D3 |
| 1 | PMEG3005ET-QR NEXPERIA | SOT23 | D4 |
| 1 | 0.1UF 10uF | C_1206_3216Metric | C1 |
| 1 | 0.33UF 10uF | C_1206_3216Metric | C2 |
| 1 | 10UF 0.33uF | C_1206_3216Metric | C3 |
| 1 | 10uF | C_1206_3216Metric | C4 |
| 2 | 130R | R_1206_3216Metric | R1, R2 |
| 2 | 1.1K 1.1k | R_1206_3216Metric | R3, R5 |
| 1 | 15K 15k | R_1206_3216Metric | R4 |
| 1 | 2.4K 2.4k | R_1206_3216Metric | R6 |
PWM Controller V2 design files
The KiCad project lives in the KitiliKisinguh/Headspace-Sampling-Device repository on GitHub; these links point at the commit this page was built from.
PWM Controller V2: common questions
How big is the PWM Controller V2 PCB?
The PWM Controller V2 measures 44 × 37 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PWM Controller V2?
18 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PWM Controller V2 design files?
From the KitiliKisinguh/Headspace-Sampling-Device repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PWM Controller V2 design in my own project?
Yes, under the terms of its MIT license, which KitiliKisinguh chose for the repository.
