TriggerBoard
About the TriggerBoard PCB
TriggerBoard is an open source PCB design by kje123, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 41.7 × 9.7 mm, with 5 components from 5 distinct parts.
By type, the board carries 2 connectors and 2 switches.
From the project
A fork of the PhobGCC project, created for the JESNET Gamecube Controller
If you've stumbled upon this, congrats! You have found this earlier than intended. This project is currently in the prototyping phase, so I do not recommend using this until I have done an official release, and I cannot help you if weird issues pop up.
If you wanna ask me questions or get involved, you can find me on Discord. My username is .kje
Original PhobGCC project here: https://github.com/PhobGCC
TriggerBoard bill of materials (BOM)
5 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L | Pin_Header_Straight_1x02_Pitch2.54mm | J1 |
| 1 | R | Pin_Header_Straight_1x02_Pitch2.54mm | J2 |
| 1 | MouseBiteRA | breakaway-mousebites-double | H2 |
| 1 | L | Trigger_Contact_Big | SW1 |
| 1 | R | Trigger_Contact_Big | SW2 |
TriggerBoard design files
The KiCad project lives in the kje123/jesphob repository on GitHub; these links point at the commit this page was built from.
TriggerBoard: common questions
How big is the TriggerBoard PCB?
The TriggerBoard measures 41.7 × 9.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TriggerBoard?
5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TriggerBoard design files?
From the kje123/jesphob repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TriggerBoard design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which kje123 chose for the repository.
