Hub75-adapter backup
About the Hub75-adapter backup PCB
Hub75-adapter backup is an open source PCB design by Knifa, published on GitHub. It is a 2-layer board measuring 21.8 × 64.6 mm, with 7 components from 6 distinct parts.
By type, the board carries 4 connectors, 2 capacitors and 1 diode.
From the project
PCBs to connect HUB75 LED panels to the Raspberry Pi
Hub75-adapter backup bill of materials (BOM)
7 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PI | PiHeader | J1 |
| 1 | 5V_IN | AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J2 |
| 1 | HUB75 | IDC-Header_2x08_P2.54mm_Horizontal | J3 |
| 1 | 5V_OUT_MATRIX | AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | J4 |
| 1 | D_TVS | D_DO-15_P10.16mm_Horizontal | D1 |
| 2 | 330u | CP_Radial_D6.3mm_P2.50mm | C2, C3 |
Hub75-adapter backup design files
The KiCad project lives in the Knifa/pi2hub75 repository on GitHub; these links point at the commit this page was built from.
Hub75-adapter backup: common questions
How big is the Hub75-adapter backup PCB?
The Hub75-adapter backup measures 21.8 × 64.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hub75-adapter backup?
7 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hub75-adapter backup design files?
From the Knifa/pi2hub75 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Hub75-adapter backup design in my own project?
The repository has no license, so all rights stay with Knifa. Use it as a reference, and ask the author before reusing the design.
