Aldu
Kreyl·Aldu·Aldu_hw/Aldu.kicad_pcb
About the Aldu PCB
Aldu is an open source STM32 PCB design by Kreyl, published on GitHub. It is a 2-layer board measuring 108 × 66 mm, with 121 components from 52 distinct parts.
Its main chip is the STM32F205Rx-64, from the STM32 family. By type, the board carries 59 capacitors, 17 resistors, 5 inductors, 4 transistors, 4 switches and 4 test points.
From the project
Trees of Valinor
Aldu bill of materials (BOM)
121 components, 52 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | IRF8714 | SO8_150MIL | Q1, Q2, Q3, Q4 |
| 1 | ANT_GENERAL | ANT_868_IFA_SIMPLEJOY | ANT1 |
| 1 | BAT | BATTERY_CH7410 | B1 |
| 1 | 0896BM15A0001E BALUN868JOHANSON | BALUN_JOHANSON868 | BLN1 |
| 1 | LP2951 | SO8_150MIL | DA1 |
| 2 | LM3150 | HTSSOP14 | DA2, DA3 |
| 2 | M74VHC1GT125DT1G MC74VHC1 | SOT23-5 | DA4, DA5 |
| 1 | M24C08-WMN6P 24C08 | SO8_150MIL | DD1 |
| 1 | STM32F205Rx-64 | LQFP64 | DD2 |
| 1 | CC1101 | QFN20 | DD3 |
| 1 | Fuse0R | FuseShorted | F1 |
| 4 | HOLE_METALLED | Hole3_5_out6mm | HOLE1, HOLE2, HOLE3, HOLE4 |
| 4 | BUTTON | BTN_6x6_4x4 | SW1, SW2, SW3, SW4 |
| 4 | TESTPOINT | TESTPOINT_1MM | TP1, TP2, TP3, TP4 |
| 1 | CONN_2 | TermiBlockHeader_508_x2_R | XL1 |
| 1 | CONN_6 | PLS-6 | XL2 |
| 1 | 47491-0001 MOLEX USB_Micro_B | USBmicro_MOLEX_WM17142 | XL3 |
| 1 | CONN_NOKIA_LCD | NOKIA_10PIN | XL4 |
| 1 | CONN_5 | PLS-5 | XL5 |
| 2 | CONN_3 | TermiBlockHeader_508_x3_R | XL6, XL7 |
Show 32 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 12MHz | 0503x4-4 | XTAL1 |
| 1 | 32768 | KX26 | XTAL2 |
| 1 | 27MHz | 03225C4 | XTAL3 |
| 2 | SS14 | SMA_DO214AC | D1, D2 |
| 2 | BLM15AG102SN1 | IND_0402 | L1, L2 |
| 2 | IHLP5050CEER4R7M01 4.7uH | 13x13 | L3, L4 |
| 1 | 1.2nH | IND_0402 | L5 |
| 3 | ~ 0.1u | CAP_0603 | C1, C53, C54 |
| 9 | 1000u | CAP_10xxR | C2, C4, C7, C46, C47, C49, C50, C51 +1 |
| 1 | ~ 10n | CAP_0603 | C3 |
| 22 | 0.1u | CAP_0603 | C5, C6, C8, C14, C16, C17, C18, C19 +14 |
| 1 | 10n | CAP_0603 | C9 |
| 4 | 18pF | CAP_0603 | C10, C11, C33, C36 |
| 2 | 2u2 | CAP_0603 | C12, C13 |
| 1 | CL10A106MQ8NNNC 10u | CAP_0603 | C15 |
| 2 | 6.8pF | CAP_0603 | C21, C22 |
| 4 | CL21A106KOQNNNE 10u 16V | CAP_0805 | C23, C24, C25, C26 |
| 3 | 1u | CAP_0603 | C31, C32, C37 |
| 2 | 0.47u | CAP_0603 | C34, C35 |
| 2 | CC0603JRNPO9BN471 470pF | CAP_0603 | C42, C43 |
| 1 | 100pF | CAP_0402 | C55 |
| 1 | 2pF | CAP_0402 | C56 |
| 1 | DoNotMount | CAP_0402 | C57 |
| 4 | 10k | RES_0603 | R1, R2, R15, R17 |
| 1 | 100R | RES_0603 | R3 |
| 2 | 20k | RES_0603 | R4, R10 |
| 1 | 12k | RES_0603 | R5 |
| 2 | 1k | RES_0603 | R6, R7 |
| 2 | 100k | RES_0603 | R8, R9 |
| 2 | 2k | RES_0603 | R11, R12 |
| 1 | 56k | RES_0603 | R13 |
| 2 | 75k | RES_0603 | R14, R16 |
Aldu design files
The KiCad project lives in the Kreyl/Aldu repository on GitHub; these links point at the commit this page was built from.
- LayoutAldu_hw/Aldu.kicad_pcb
- SchematicAldu_hw/Aldu.kicad_sch
Aldu: common questions
What microcontroller does the Aldu use?
The Aldu is built around the STM32F205Rx-64, from the STM32 family.
How big is the Aldu PCB?
The Aldu measures 108 × 66 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Aldu?
121 components, from 52 distinct parts. The full bill of materials is listed on this page.
Where can I download the Aldu design files?
From the Kreyl/Aldu repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Aldu design in my own project?
The repository has no license, so all rights stay with Kreyl. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Aldu without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k