AlienDetector
Kreyl·AlienDetector·AlienDetector_hw/AlienDetector.kicad_pcb
About the AlienDetector PCB
AlienDetector is an open source STM32 PCB design by Kreyl, published on GitHub. It is a 2-layer board measuring 60 × 76 mm, with 74 components from 34 distinct parts.
Its main chip is the STM32L476Rx, from the STM32 family. Other key parts include the ER-TFT024. By type, the board carries 36 capacitors, 10 resistors, 6 inductors, 1 IC, 1 transistor and 1 buzzer.
Main components on the AlienDetector
AlienDetector bill of materials (BOM)
74 components, 34 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ER-TFT024 | ER-CON50HT-1 | U1 |
| 1 | MMBT2222 | SOT23-3 | Q1 |
| 1 | BAT | BATTERY_AA | B1 |
| 1 | BUZZER | BUZZER_HC0903 | BZ1 |
| 1 | NCP1400 | SOT23-5 | DA1 |
| 1 | STM32L476Rx | LQFP64 | DD1 |
| 1 | 24C08 | SO8_150MIL | DD2 |
| 1 | CC2500 | QFN20 | DD3 |
| 1 | STMPE811 | QFN16_4x4_H | DD4 |
| 4 | HOLE_METALLED | Hole3d3_out5d5mm | HOLE1, HOLE2, HOLE3, HOLE4 |
| 2 | REFPOINT | REF_POINT_2MM | RP1, RP2 |
| 1 | SWITCH_H | SW_SS9 | SW1 |
| 1 | TESTPOINT | TESTPOINT_1MM | TP1 |
| 1 | CONN_6 | PLS-6 | XL1 |
| 1 | CONN_5 | WB-05(MW-5M) | XL2 |
| 1 | CONN_3 | PLS-3 | XL3 |
| 1 | 27MHz | 03225C4 | XTAL1 |
| 1 | PMEG2020 | SOD323 | D1 |
| 2 | BLM15AG102 | IND_0402 | L1, L6 |
| 1 | 22uH | IND_1210_LQH32C | L2 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 1.2nH | IND_0402 | L3, L4, L5 |
| 5 | 10u | CAP_0603 | C1, C5, C13, C30, C31 |
| 17 | 0.1u | CAP_0603 | C2, C3, C4, C6, C8, C9, C10, C12 +9 |
| 3 | 1u | CAP_0603 | C7, C11, C35 |
| 2 | 18pF | CAP_0603 | C14, C16 |
| 3 | 220pF | CAP_0603 | C18, C24, C27 |
| 2 | 100pF | CAP_0402 | C20, C21 |
| 2 | 1pF | CAP_0402 | C23, C25 |
| 1 | 1.8pF | CAP_0402 | C28 |
| 1 | 1.5pF | CAP_0402 | C29 |
| 4 | 10k | RES_0603 | R1, R3, R4, R10 |
| 1 | 1k | RES_0603 | R2 |
| 1 | 56k | RES_0603 | R5 |
| 4 | 100R | RES_0603 | R6, R7, R8, R9 |
AlienDetector design files
The KiCad project lives in the Kreyl/AlienDetector repository on GitHub; these links point at the commit this page was built from.
AlienDetector: common questions
What microcontroller does the AlienDetector use?
The AlienDetector is built around the STM32L476Rx, from the STM32 family.
How big is the AlienDetector PCB?
The AlienDetector measures 60 × 76 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AlienDetector?
74 components, from 34 distinct parts. The full bill of materials is listed on this page.
Where can I download the AlienDetector design files?
From the Kreyl/AlienDetector repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the AlienDetector design in my own project?
The repository has no license, so all rights stay with Kreyl. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the AlienDetector without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k