Avada
Kreyl·avada·Avada_hw/avada.kicad_pcb
About the Avada PCB
Avada is an open source STM32 PCB design by Kreyl, published on GitHub. It is a 2-layer board measuring 30.2 × 53.5 mm, with 40 components from 26 distinct parts.
Its main chip is the STM32L151CxTx, from the STM32 family. By type, the board carries 13 capacitors, 6 resistors, 5 transistors, 5 diodes, 3 switches and 1 buzzer.
From the project
Green Flash of Justice
Avada bill of materials (BOM)
40 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | IRLML6401 | SOT23-3 | Q1, Q2 |
| 3 | NSS20101 | SC89-3 | Q3, Q4, Q5 |
| 1 | LP603030 | EEMB603030 | B1 |
| 1 | PS-9627 | BUZZER_HC0903 | BZ1 |
| 1 | MCP73832 | SOT23-5 | DA1 |
| 1 | NCP583SQ | SC82AB | DA2 |
| 1 | STM32L151CxTx | LQFP48 | DD1 |
| 1 | Fuse0R | RES_0603_FUSE | F1 |
| 1 | IT1198 | BTN_IT1198 | SW1 |
| 1 | DIPx6 | DIP_SMD_1D27X6 | SW2 |
| 1 | SS-1P2T | SW_SS-1P2T_R | SW3 |
| 1 | CONN_6 | PLS-6 | XL1 |
| 1 | USB_Micro_B | USBmicro_MOLEX_WM17142 | XL2 |
| 1 | LED | LED_0603 | D1 |
| 1 | PMEG2020 | SOD323 | D2 |
| 1 | LED | LED_Diamond_Dragon | D3 |
| 1 | LED | LED_RAD | D4 |
| 1 | LED | LED_XPE | D5 |
| 2 | 10n | CAP_0603 | C1, C10 |
| 3 | 10u | CAP_0603 | C2, C4, C6 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 1u | CAP_0603 | C3, C5, C11 |
| 3 | 0.1u | CAP_0603 | C7, C8, C9 |
| 2 | 220u | CAP_05xxR_horiz_HOLE | C12, C13 |
| 3 | 1k | RES_0603 | R1, R5, R6 |
| 1 | 3k | RES_0603 | R2 |
| 2 | 10k | RES_0603 | R3, R4 |
Avada design files
The KiCad project lives in the Kreyl/avada repository on GitHub; these links point at the commit this page was built from.
- LayoutAvada_hw/avada.kicad_pcb
Avada: common questions
What microcontroller does the Avada use?
The Avada is built around the STM32L151CxTx, from the STM32 family.
How big is the Avada PCB?
The Avada measures 30.2 × 53.5 mm, has 2 copper layers and is 1.5 mm thick.
How many components are on the Avada?
40 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Avada design files?
From the Kreyl/avada repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Avada design in my own project?
The repository has no license, so all rights stay with Kreyl. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Avada without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k