Flute
Kreyl·Flute·Flute_hw/Flute.kicad_pcb
About the Flute PCB
Flute is an open source STM32 PCB design by Kreyl, published on GitHub. It is a 4-layer board measuring 310.5 × 21.4 mm, with 103 components from 40 distinct parts.
Its main chip is the STM32L476RCT6, from the STM32 family. By type, the board carries 48 capacitors, 13 resistors, 7 switches, 3 inductors, 2 transistors and 2 diodes.
Flute bill of materials (BOM)
103 components, 40 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | IRLML6401 | SOT23-3 | Q1, Q2 |
| 1 | ANT_PCB_MONO | Flute_868_inverted | ANT1 |
| 1 | 0896BM15A0001E BALUN868JOHANSON | BALUN_JOHANSON868 | BLN1 |
| 1 | CS42L52 | QFN40 | DA1 |
| 1 | NCP511SN25 | SOT23-5 | DA2 |
| 1 | MCP1700T-3302E/TT MCP1700 | SOT23-3A | DA3 |
| 1 | TP4056 | SO8_150MIL | DA4 |
| 1 | CC1101 | QFN20 | DD1 |
| 1 | STM32L476RCT6 STM32L476Rx | LQFP64 | DD2 |
| 1 | LSM6DS3 | 14_3x2d5_p0d5 | DD3 |
| 8 | HOLE_METALLED | Hole2d2_out3d5mm | HOLE1, HOLE2, HOLE3, HOLE4, HOLE5, HOLE6, HOLE7, HOLE8 |
| 7 | BUTTON | BTN_4x4_SMD | SW1, SW2, SW3, SW4, SW5, SW6, SW7 |
| 1 | TESTPOINT | TESTPOINT_1MM | TP1 |
| 1 | CONN_6 | PLS-6_LOCK | XL1 |
| 1 | CONN_MICROSD | MICROSD_CAP_FIX05A | XL2 |
| 1 | USB_MICRO | USBmicro_MOLEX_1050170001 | XL3 |
| 2 | CONN_1 | Oval3x1.5 | XL4, XL5 |
| 1 | CONN_1 | PLS-1Rnd | XL6 |
| 2 | CONN_1 | Square_1MM5 | XL7, XL8 |
| 1 | 12MHz | 03225C4 | XTAL1 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 27MHz | 03225C4 | XTAL2 |
| 1 | LED | LED_0603 | D1 |
| 1 | PMEG2020 | SOD323 | D2 |
| 1 | 12nH | IND_0402 | L1 |
| 2 | BLM15AG102SN1 | IND_0402 | L2, L3 |
| 1 | DoNotMount | CAP_0402 | C1 |
| 1 | 3pF | CAP_0402 | C2 |
| 4 | 18pF | CAP_0603_Silks | C3, C4, C5, C6 |
| 21 | 0.1u | CAP_0603_Silks | C7, C9, C10, C11, C12, C13, C14, C15 +13 |
| 12 | 1u | CAP_0603_Silks | C8, C21, C24, C25, C28, C32, C33, C37 +4 |
| 1 | 10n | CAP_0603_Silks | C16 |
| 4 | CL10A106MQ8NNNC 10u | CAP_0603_Silks | C17, C29, C46, C47 |
| 2 | 150pF | CAP_0603_Silks | C34, C36 |
| 2 | 10u | CAP_0603_Silks | C35, C43 |
| 3 | 1k | RES_0603 | R1, R2, R4 |
| 2 | 56k | RES_0603 | R3, R5 |
| 2 | 100k | RES_0603 | R6, R7 |
| 4 | 10k | RES_0603 | R8, R9, R11, R13 |
| 1 | 0R2 | RES_1206 | R10 |
| 1 | 1.2k | RES_0603 | R12 |
Flute design files
The KiCad project lives in the Kreyl/Flute repository on GitHub; these links point at the commit this page was built from.
- LayoutFlute_hw/Flute.kicad_pcb
- SchematicFlute_hw/Flute.kicad_sch
Flute: common questions
What microcontroller does the Flute use?
The Flute is built around the STM32L476RCT6, from the STM32 family.
How big is the Flute PCB?
The Flute measures 310.5 × 21.4 mm, has 4 copper layers and is 1.5 mm thick.
How many components are on the Flute?
103 components, from 40 distinct parts. The full bill of materials is listed on this page.
Where can I download the Flute design files?
From the Kreyl/Flute repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Flute design in my own project?
The repository has no license, so all rights stay with Kreyl. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Flute without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k