GSLeaf
Kreyl·GardenOfShadows·GSLeaf/PCB/GSLeaf.kicad_pcb
About the GSLeaf PCB
GSLeaf is an open source STM32 PCB design by Kreyl, published on GitHub. It is a 2-layer board measuring 30 × 103 mm, with 115 components from 49 distinct parts.
Its main chip is the STM32L476Rx, from the STM32 family. By type, the board carries 53 capacitors, 19 resistors, 6 test points, 5 transistors, 3 switches and 3 inductors.
From the project
Electronics for Garden of Shadows project
GSLeaf bill of materials (BOM)
115 components, 49 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LED_5050 | LED_5050 | Q1 |
| 2 | IRLML6401 | SOT23-3 | Q2, Q3 |
| 1 | IRLML9303 | SOT23-3 | Q4 |
| 1 | 2N7002 | SOT23-3 | Q5 |
| 1 | ANT_PCB_MONO | ANT_868_SEIDHE | ANT1 |
| 1 | BAT | EEMB603030 | B1 |
| 1 | BALUN868JOHANSON | BALUN_JOHANSON868 | BLN1 |
| 1 | MCP73832 | SOT23-5 | DA1 |
| 1 | CS42L52 | QFN40 | DA2 |
| 1 | NCP583SQ | SC82AB | DA3 |
| 1 | NCP511SN25 | SOT23-5 | DA4 |
| 1 | STM32L476Rx | LQFP64 | DD1 |
| 1 | CC1101 | QFN20 | DD2 |
| 1 | LIS3 | LGA16_3X3_5_3 | DD3 |
| 1 | MMA8452Q | QFN16_5x3 | DD4 |
| 1 | Fuse0R | RES_0603_FUSE | F1 |
| 4 | HOLE_METALLED | Hole2d4_out4d5mm | HOLE1, HOLE2, HOLE3, HOLE4 |
| 1 | SWITCH | SW_SS-1P2T | SW1 |
| 2 | BTN | BTN_4x4_SMD | SW2, SW3 |
| 6 | TESTPOINT | TESTPOINT_1MM | TP2, TP3, TP4, TP5, TP6, TP7 |
Show 29 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_6 | PLS-6 | XL1 |
| 1 | USB_MINI_B | USBmicro_MOLEX_WM17142 | XL2 |
| 1 | CONN_4 | PLS-4 | XL3 |
| 1 | AudioJackSimple | AUDIO_CKX3_5_30 | XL4 |
| 1 | CONN_2 | PLS-2 | XL5 |
| 1 | CONN_MICROSD | MICROSD_CAP_FIX05A | XL6 |
| 1 | CONN_1 | PLS-1Rnd | XL7 |
| 1 | 12MHz | 0503x4-4 | XTAL1 |
| 1 | 27MHz | 03225C4 | XTAL2 |
| 1 | PMEG2020 | SOD323 | D1 |
| 1 | BLM15 | IND_0402 | L1 |
| 1 | BLM15AG102SN1 | IND_0402 | L2 |
| 1 | * | IND_0402 | L3 |
| 7 | 10u | CAP_0603 | C1, C3, C11, C20, C36, C48, C49 |
| 1 | 10n | CAP_0603 | C2 |
| 23 | 0.1u | CAP_0603 | C4, C10, C12, C13, C16, C17, C21, C23 +15 |
| 4 | 18pF | CAP_0603 | C5, C6, C37, C38 |
| 12 | 1u | CAP_0603 | C7, C15, C18, C19, C25, C26, C27, C31 +4 |
| 2 | 150pF | CAP_0603 | C8, C9 |
| 2 | 22n | CAP_0603 | C14, C22 |
| 2 | * | CAP_0402 | C42, C46 |
| 3 | 100R | RES_0603 | R1, R2, R3 |
| 3 | 10k | RES_0603 | R4, R9, R12 |
| 6 | 100k | RES_0603 | R5, R13, R14, R17, R18, R19 |
| 1 | 1k | RES_0603 | R6 |
| 2 | 4k7 | RES_0603 | R7, R8 |
| 2 | 51R | RES_0603 | R10, R11 |
| 1 | 20k | RES_0603 | R15 |
| 1 | 56k | RES_0603 | R16 |
GSLeaf design files
The KiCad project lives in the Kreyl/GardenOfShadows repository on GitHub; these links point at the commit this page was built from.
GSLeaf: common questions
What microcontroller does the GSLeaf use?
The GSLeaf is built around the STM32L476Rx, from the STM32 family.
How big is the GSLeaf PCB?
The GSLeaf measures 30 × 103 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the GSLeaf?
115 components, from 49 distinct parts. The full bill of materials is listed on this page.
Where can I download the GSLeaf design files?
From the Kreyl/GardenOfShadows repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the GSLeaf design in my own project?
The repository has no license, so all rights stay with Kreyl. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the GSLeaf without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in GardenOfShadows
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k