Locket
Kreyl·Locket·Hardware/Locket.kicad_pcb
About the Locket PCB
Locket is an open source STM32 PCB design by Kreyl, published on GitHub. It is a 2-layer board measuring 59 × 59 mm, with 76 components from 41 distinct parts.
Its main chip is the STM32L151CXTX, from the STM32 family. By type, the board carries 26 capacitors, 11 resistors, 4 fuses, 4 switches, 4 inductors and 3 transistors.
It belongs with the rf & radio and sensors designs in this gallery.
From the project
Locket ptetending to be universal. Radio, RGB LED, vibro, beeper, slide switch, button, pill connector, accelerometer, 2xAAA
Locket bill of materials (BOM)
76 components, 41 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MOTOR_PAD | MOTOR_KHN4NX | M1 |
| 1 | LED_RGB 5050 | 5050 | Q1 |
| 2 | IRLML9303 | SOT23-3 | Q2, Q3 |
| 1 | ANT_PCB_MONO_2PIN | ANT_868_ROUND_F | ANT1 |
| 2 | BAT | BATTERY_AAA_X1 | B1, B2 |
| 1 | 0896BM15A0001 | BALUN_JOHANSON868 | BLN1 |
| 1 | BUZZER | BUZZER_HC0903 | BZ1 |
| 1 | NCP1400 | SOT23-5 | DA1 |
| 1 | STM32L151CXTX | LQFP48 | DD1 |
| 1 | CC1101 | QFN20 | DD2 |
| 1 | MMA8452Q | QFN16_5_3 | DD3 |
| 4 | Fuse0R | RES_0603_FUSE | F1, F2, F3, F4 |
| 2 | REFPOINT | REF_POINT_1MM | RP1, RP2 |
| 1 | SWITCH | SW_SS-6 | SW1 |
| 1 | BUTTON | BTN_6x6 | SW2 |
| 1 | DIPx4 | DIP_SMD_X4 | SW3 |
| 1 | SWITCH | SW_SS-1P2T | SW4 |
| 3 | TESTPOINT | TESTPOINT_1MM | TP1, TP2, TP3 |
| 1 | CONN_3 | PLS-3 | XL1 |
| 2 | CONN_2 | PLS-2 | XL2, XL6 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ST_SWD | PLS-4 | XL3 |
| 2 | CONN_4 | PLS-4 | XL4, XL5 |
| 1 | 27MHz | 03225C4 | XTAL1 |
| 2 | BAT54WS | SOD323 | D1, D2 |
| 1 | 22uH | IND_1210_LQH32C | L1 |
| 2 | TB201209 G152 | IND_0805 | L2, L3 |
| 1 | TBD | IND_0402 | L4 |
| 7 | 10u | CAP_0805 | C1, C7, C8, C10, C20, C21, C22 |
| 7 | 0.1u | CAP_0603 | C2, C3, C4, C9, C13, C18, C24 |
| 3 | 10n | CAP_0603 | C5, C15, C17 |
| 1 | 1u | CAP_0603 | C6 |
| 2 | 10pF | CAP_0603 | C11, C12 |
| 2 | 220pF | CAP_0603 | C14, C19 |
| 1 | 3.3pF | CAP_0603 | C16 |
| 2 | TBD | CAP_0402 | C23, C25 |
| 1 | 100pF | CAP_0402 | C26 |
| 4 | 4K7 | RES_0603 | R1, R2, R10, R11 |
| 1 | 150 | RES_0603 | R3 |
| 3 | 51R | RES_0603 | R4, R5, R6 |
| 2 | 20k | RES_0603 | R7, R9 |
| 1 | 56k | RES_0603 | R8 |
Locket design files
The KiCad project lives in the Kreyl/Locket repository on GitHub; these links point at the commit this page was built from.
Locket: common questions
What microcontroller does the Locket use?
The Locket is built around the STM32L151CXTX, from the STM32 family.
How big is the Locket PCB?
The Locket measures 59 × 59 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Locket?
76 components, from 41 distinct parts. The full bill of materials is listed on this page.
Where can I download the Locket design files?
From the Kreyl/Locket repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Locket design in my own project?
The repository has no license, so all rights stay with Kreyl. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Locket without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k