Locket hw

Kreyl·Locket_hw·PCB/Locket.kicad_pcb

Locket hw PCB layout, top view — open source STM32 board by Kreyl

About the Locket hw PCB

Locket hw is an open source STM32 PCB design by Kreyl, published on GitHub. It is a 2-layer board measuring 59 × 59 mm, with 77 components from 38 distinct parts.

Its main chip is the STM32L151CXTX, from the STM32 family. By type, the board carries 25 capacitors, 13 resistors, 5 switches, 4 inductors, 3 transistors and 3 test points.

It belongs with the rf & radio designs in this gallery.

From the project

Hardware of the Locket

Hardware for the Locket Project (Russian description, English description)

Locket is the device for LARPs. It has stm32 microcontroller, 868 MHz radio, buttons, vibro, RGB led, beeper and accelerometer. It is placed in nice 3d-printed case. Locket may be used for rather complex gamedesign. It is powered by two AAA batteries.

Repository contains pcb files, antenna information and case model.

Locket hw bill of materials (BOM)

77 components, 38 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MOTOR_NO_CONTACTS
M1
1
LED_RGB 5050
Q1
2
MMBT2222
Q2, Q3
1
ANT_PCB_MONO_2PIN
ANT1
1
BAT_HOLDER
B1
1
BALUN868JOHANSON
BLN1
1
PS-9627
BZ1
1
NCP1400
DA1
1
STM32L151CXTX
STM32L151CxTx
DD1
1
LIS3
DD2
1
CC1101
DD3
4
HOLE_METALLED
HOLE1, HOLE2, HOLE3, HOLE4
4
REFPOINT
RP1, RP2, RP3, RP4
1
DIPX8
DIPx8
SW1
3
BUTTON
SW2, SW3, SW5
1
SWITCH
SW4
3
TESTPOINT
TP1, TP2, TP3
1
CONN_6
XL1
1
CONN_4
XL2
2
CONN_1
XL3, XL4
Show 18 more
QtyPartRefs
1
27MHZ
27MHz
XTAL1
2
BAT54WS
D1, D2
1
22UH
22uH
L1
2
BLM15AG102SN1
L2, L3
1
8.2NH
8.2nH
L4
7
10U
10u
C1, C8, C9, C10, C20, C22, C25
12
0.1U
0.1u
C2, C3, C4, C7, C13, C14, C15, C16 +4
1
10N
10n
C5
1
1u
C6
2
18PF
18pF
C11, C12
1
3.3PF
3.3pF
C23
1
100PF
100pF
C26
3
100R
R1, R2, R3
4
10K
10k
R4, R5, R10, R11
1
150R
R6
1
100K
100k
R7
2
56K
56k
R8, R12
2
1k
R9, R13

Locket hw design files

The KiCad project lives in the Kreyl/Locket_hw repository on GitHub; these links point at the commit this page was built from.

Locket hw: common questions

What microcontroller does the Locket hw use?

The Locket hw is built around the STM32L151CXTX, from the STM32 family.

How big is the Locket hw PCB?

The Locket hw measures 59 × 59 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Locket hw?

77 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Locket hw design files?

From the Kreyl/Locket_hw repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Locket hw design in my own project?

The repository has no license, so all rights stay with Kreyl. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Locket hw without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards