PythonsHead
Kreyl·PythonsHead·PythonsHead_hw/PythonsHead.kicad_pcb
About the PythonsHead PCB
PythonsHead is an open source STM32 PCB design by Kreyl, published on GitHub. It is a 2-layer board measuring 45 × 79.5 mm, with 92 components from 40 distinct parts.
Its main chip is the STM32L151CxTx, from the STM32 family. By type, the board carries 25 capacitors, 16 resistors, 9 diodes, 8 transistors, 4 inductors and 3 test points.
From the project
Electronics for head of python
PythonsHead bill of materials (BOM)
92 components, 40 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | MMBT2222 | SOT23-3 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 1 | ANT_PCB_MONO | ANT_868_MEANDER_4HOR_45mm | ANT1 |
| 1 | 0896BM15A0001 | BALUN_JOHANSON868 | BLN1 |
| 1 | ST1S10 | DFN8 | DA1 |
| 1 | NCP583SQ | SC82AB | DA2 |
| 1 | STM32L151CxTx | LQFP48 | DD1 |
| 1 | CC1101 | QFN20 | DD2 |
| 4 | HOLE_METALLED | Hole3_5_out6mm | HOLE1, HOLE2, HOLE3, HOLE4 |
| 2 | REFPOINT | REF_POINT_1MM | RP1, RP2 |
| 3 | TESTPOINT | TESTPOINT_1MM | TP1, TP2, TP3 |
| 2 | CONN_3 | PLS-3 | XL1, XL13 |
| 1 | ST_SWD | PLS-4 | XL2 |
| 9 | CONN_2 | PLS-2 | XL3, XL4, XL5, XL6, XL8, XL9, XL10, XL11 +1 |
| 2 | CONN_4 | PLS-4 | XL7, XL14 |
| 1 | 27MHz | 03225C4 | XTAL1 |
| 8 | BAT54WS | SOD323 | D1, D2, D3, D4, D6, D7, D8, D9 |
| 1 | LED | LED_0603 | D5 |
| 1 | 10uH | IND_SDR0604 | L1 |
| 2 | BLM15AG102SN1 | IND_0402 | L2, L3 |
| 1 | 5.6nH | IND_0402 | L4 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10u | CAP_0805 | C1 |
| 4 | 1u | CAP_0603 | C2, C4, C7, C23 |
| 1 | 1000u 15V | CAP_08xxR_HOR | C3 |
| 6 | 0.1u | CAP_0603 | C6, C12, C15, C17, C19, C22 |
| 1 | 1n | CAP_0603 | C8 |
| 1 | 220u | CAP_06xxR | C9 |
| 2 | 10pF | CAP_0603 | C10, C11 |
| 1 | 4.7u | CAP_0603 | C13 |
| 2 | 220pF | CAP_0603 | C14, C24 |
| 3 | 10n | CAP_0603 | C16, C20, C21 |
| 1 | 3.3pF | CAP_0603 | C18 |
| 1 | 1.5pF | CAP_0402 | C25 |
| 1 | DoNotMount | CAP_0402 | C26 |
| 9 | 1k | RES_0603 | R1, R2, R3, R4, R5, R6, R7, R8 +1 |
| 1 | 390k | RES_0603 | R10 |
| 1 | 100k | RES_0603 | R11 |
| 1 | 10k | RES_0603 | R12 |
| 1 | 2k | RES_0603 | R13 |
| 1 | 56k | RES_0603 | R14 |
| 2 | 4k7 | RES_0603 | R15, R16 |
PythonsHead design files
The KiCad project lives in the Kreyl/PythonsHead repository on GitHub; these links point at the commit this page was built from.
PythonsHead: common questions
What microcontroller does the PythonsHead use?
The PythonsHead is built around the STM32L151CxTx, from the STM32 family.
How big is the PythonsHead PCB?
The PythonsHead measures 45 × 79.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PythonsHead?
92 components, from 40 distinct parts. The full bill of materials is listed on this page.
Where can I download the PythonsHead design files?
From the Kreyl/PythonsHead repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PythonsHead design in my own project?
The repository has no license, so all rights stay with Kreyl. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PythonsHead without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k