Quetta
Kreyl·Quetta·Quetta_hw/Quetta.kicad_pcb
About the Quetta PCB
Quetta is an open source STM32 PCB design by Kreyl, published on GitHub. It is a 2-layer board measuring 58.2 × 42.4 mm, with 83 components from 36 distinct parts.
Its main chip is the STM32F205RX-64, from the STM32 family. By type, the board carries 41 capacitors, 13 resistors, 2 transistors, 1 antenna, 1 switch and 1 diode.
From the project
Projects based on Quetta speaking hardware
Quetta bill of materials (BOM)
83 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IRLML9303 | SOT23 | Q1 |
| 1 | BC817 | SOT23 | Q2 |
| 1 | ANT_PCB_NOCNTR | ANT_FOLDED_DIPOLE2 | ANT1 |
| 1 | VS1011 | LQFP48 | DA1 |
| 1 | TPA6211 | DRB8 | DA2 |
| 1 | NCP583SQ | SC82AB | DA3 |
| 1 | MMA8452Q | QFN16_5_3 | DD1 |
| 1 | CC2500 | QFN20 | DD2 |
| 1 | STM32F205RX-64 | LQFP64 | DD3 |
| 4 | HOLE_METALLED | Hole3_5_out6mm | HOLE1, HOLE2, HOLE3, HOLE4 |
| 1 | SWITCH_H | SW_SK12D07VG | SW1 |
| 2 | 2.2u | CAP_0603 | VCap1, VCap2 |
| 4 | CONN_3 | SIL-3 | XL1, XL3, XL7, XL11 |
| 1 | ST_SWD | SIL-4 | XL4 |
| 1 | USB_MICRO_B | USBmicro_MOLEX_WM17142 | XL5 |
| 1 | CONN_2 | SIL-2 | XL6 |
| 1 | CONN_MICROSD | MICROSD_CAP_FIX05A | XL8 |
| 1 | CONN_1 | SIL1_SQUARE_1MM5 | XL9 |
| 1 | CONN_1 | SIL1_ROUND_1MM5 | XL10 |
| 1 | 27MHz | CRYSTAL_03225C4 | XTAL1 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 12.0MHz | CRYSTAL_0503x4-4 | XTAL2 |
| 1 | LED | LED0603 | D1 |
| 2 | 10n | CAP_0603 | C1, C3 |
| 4 | 10u | CAP_0805 | C10, C26, C30, C43 |
| 21 | 0.1u | CAP_0603 | C11, C12, C13, C15, C16, C17, C20, C23 +13 |
| 3 | 220pF | CAP_0603 | C14, C21, C22 |
| 2 | 10pF | CAP_0603 | C18, C19 |
| 7 | 1u | CAP_0603 | C31, C32, C33, C35, C45, C47, C48 |
| 2 | 20pF | CAP_0603 | C36, C37 |
| 2 | 4k7 | RES_0603 | R1, R2 |
| 2 | 20 | RES_0603 | R3, R5 |
| 3 | 1k | RES_0603 | R4, R9, R11 |
| 1 | 56k | RES_0603 | R6 |
| 2 | 10k | RES_0603 | R7, R8 |
| 1 | 220R | RES_0603 | R10 |
| 2 | 100k | RES_0603 | R12, R13 |
Quetta design files
The KiCad project lives in the Kreyl/Quetta repository on GitHub; these links point at the commit this page was built from.
Quetta: common questions
What microcontroller does the Quetta use?
The Quetta is built around the STM32F205RX-64, from the STM32 family.
How big is the Quetta PCB?
The Quetta measures 58.2 × 42.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Quetta?
83 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the Quetta design files?
From the Kreyl/Quetta repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Quetta design in my own project?
The repository has no license, so all rights stay with Kreyl. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Quetta without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k