Box hw
Kreyl·Salem·Box_hw/Box_hw.kicad_pcb
About the Box hw PCB
Box hw is an open source STM32 PCB design by Kreyl, published on GitHub. It is a 2-layer board measuring 78.7 × 70 mm, with 95 components from 58 distinct parts.
Its main chip is the STM32L151CXTX, from the STM32 family. Other key parts include the MOC3061M and BTB600. By type, the board carries 30 capacitors, 19 resistors, 5 switches, 3 transistors, 3 fuses and 2 ICs.
From the project
Hw and Sw for Salem Box and Locket
Main components on the Box hw
Box hw bill of materials (BOM)
95 components, 58 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MOC3061M | DIL6 | U1 |
| 1 | BTB600 | TO220 | U2 |
| 1 | 2N7002 | SOT23 | Q1 |
| 1 | MMBT2222 | SOT23 | Q2 |
| 1 | IRLMS9303 | SOT23 | Q3 |
| 1 | ANT_PCB_MONO | ANT_868_MEANDER2 | ANT1 |
| 1 | 0896BM15A0001 | BALUN_JOHANSON868 | BLN1 |
| 1 | BUZZER | BUZZER_HC0903 | BZ1 |
| 1 | IPS6041 | SO8HEATSINK | DA1 |
| 1 | ST1S10 | DFN8 | DA2 |
| 1 | NCP583SQ | SC82AB | DA3 |
| 1 | STM32L151CXTX | LQFP48 | DD1 |
| 1 | CC1101 | QFN20 | DD2 |
| 3 | FUSE0R | SMD0603_FUSE | F1, F2, F3 |
| 2 | HOLE_METALLED | Hole3_5_out6mm | HOLE1, HOLE2 |
| 2 | REFPOINT | REF_POINT_1MM | RP1, RP2 |
| 4 | BUTTON | BUTTON_6x6SMD | SW1, SW2, SW3, SW4 |
| 1 | SWITCH_H | SWITCH_SS9 | SW5 |
| 2 | TESTPOINT | TESTPOINT_1MM | TP1, TP2 |
| 1 | ST_SWD | CONN_PLS-4 | XL1 |
Show 38 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_3 | CONN_PLS-3 | XL2 |
| 1 | CONN_4 | CONN_PLS-4 | XL3 |
| 1 | CONN_4 | CONN_PBS_4R | XL4 |
| 1 | CONN_NOKIA_LCD10 | CONN_NOKIA1101_LCD | XL5 |
| 1 | USB_MICRO_B | USBmicro_MOLEX_WM17142 | XL6 |
| 2 | RJ11 | RJ11_TJ6_6P6C | XL7, XL8 |
| 5 | CONN_2 | SPRING_TERM_XY124V_A_2 | XL9, XL10, XL11, XL12, XL13 |
| 1 | 27MHz | CRYSTAL_03225C4 | XTAL1 |
| 1 | 12.0MHz | CRYSTAL_0503x4-4 | XTAL2 |
| 1 | BAXXXC | SOT23 | D1 |
| 1 | SM4007 | DIODE_MELF_DO213AB | D2 |
| 1 | 5.6nH | IND_0402 | L1 |
| 1 | 10uH | IND_SR0604 | L2 |
| 7 | 0.1u | CAP_0603 | C1, C7, C11, C13, C14, C18, C20 |
| 1 | 1.8pF | CAP_0402 | C2 |
| 2 | 220pF | CAP_0603 | C3, C8 |
| 3 | 10n | CAP_0603 | C4, C6, C15 |
| 1 | 3.3pF | CAP_0603 | C5 |
| 2 | 10pF | CAP_0603 | C9, C10 |
| 3 | 10u | CAP_0805 | C12, C19, C21 |
| 4 | 1u | CAP_0603 | C16, C22, C29, C31 |
| 2 | 20pF | CAP_0603 | C23, C24 |
| 4 | 22u | CAP_1206 | C25, C26, C27, C28 |
| 1 | 0.01u | CAP_1206 | C30 |
| 1 | 51R | RES_0603 | R1 |
| 1 | 56k | RES_0603 | R2 |
| 3 | 10k | RES_0603 | R3, R10, R11 |
| 2 | 1k | RES_0603 | R4, R19 |
| 2 | 4K7 | RES_0603 | R5, R6 |
| 1 | 150 | RES_0603 | R7 |
| 1 | 220R | RES_0603 | R8 |
| 1 | 43k | RES_0603 | R9 |
| 1 | 2k | RES_0603 | R12 |
| 1 | 150R | RES_0603 | R13 |
| 1 | 200k | RES_1206 | R14 |
| 1 | 200R | RES_1206 | R15 |
| 1 | 39R | RES_1206 | R16 |
| 2 | 51k | RES_1206 | R17, R18 |
Box hw design files
The KiCad project lives in the Kreyl/Salem repository on GitHub; these links point at the commit this page was built from.
- LayoutBox_hw/Box_hw.kicad_pcb
Box hw: common questions
What microcontroller does the Box hw use?
The Box hw is built around the STM32L151CXTX, from the STM32 family.
How big is the Box hw PCB?
The Box hw measures 78.7 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Box hw?
95 components, from 58 distinct parts. The full bill of materials is listed on this page.
Where can I download the Box hw design files?
From the Kreyl/Salem repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Box hw design in my own project?
The repository has no license, so all rights stay with Kreyl. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Box hw without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Salem
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k