Silmarili
Kreyl·Silmarili·Silmaril_hw/Silmaril.net
About the Silmarili PCB
Silmarili is an open source STM32 PCB design by Kreyl, published on GitHub. It is a board, with 65 components from 37 distinct parts.
Its main chip is the stm32L151c8t6, from the STM32 family. By type, the board carries 30 capacitors, 10 resistors, 4 inductors, 2 switches, 2 test points and 2 diodes.
Silmarili bill of materials (BOM)
65 components, 37 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MMBT2222 | SOT23-3 | Q1 |
| 1 | ANT_PCB_MONO_2PIN | Silmaril | ANT1 |
| 1 | BAT | 18650x1 | B1 |
| 1 | 0896BM15A0001E BALUN868JOHANSON | BALUN_JOHANSON868 | BLN1 |
| 1 | ST1CC40DR ST1CC40_SO8 | SO8_150MIL | DA1 |
| 1 | MCP1700T-3302E/TT MCP1700 | SOT23-3A | DA2 |
| 1 | stm32L151c8t6 STM32L151CxTx | LQFP48 | DD1 |
| 1 | MMA8452Q | QFN16_5x3 | DD2 |
| 1 | CC1101 | QFN20 | DD3 |
| 1 | Fuse0R | FuseShorted | F1 |
| 1 | SWITCH | SW_SS9 | SW1 |
| 1 | DIPx6 | DIP_SMD_1D27X6 | SW2 |
| 2 | TESTPOINT | TESTPOINT_1MM | TP1, TP2 |
| 1 | CONN_6 | PLS-6 | XL1 |
| 1 | CONN_5 | PLS-5 | XL2 |
| 2 | CONN_1 | Oval3x1.5 | XL3, XL4 |
| 1 | 27MHz | 03225C4 | XTAL1 |
| 1 | XPGDWT-01-0000-00ME3 LED | LED_XPE | D1 |
| 1 | BAT54WS | SOD323 | D2 |
| 1 | SRN2512-2R2M 2.2uH | IND_SRN2512 | L1 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | BLM15AG102SN1 | IND_0402 | L2, L3 |
| 1 | * | IND_0402 | L4 |
| 1 | CC0805KKX5R6BB106 10u | CAP_0603 | C1 |
| 3 | 1u | CAP_0603 | C2, C8, C23 |
| 15 | 0.1u | CAP_0603 | C3, C6, C7, C11, C12, C13, C14, C16 +7 |
| 2 | 10u | CAP_0603 | C4, C5 |
| 3 | CL10A106MQ8NNNC 10u | CAP_0603 | C9, C21, C29 |
| 2 | 18pF | CAP_0603 | C10, C15 |
| 1 | 10n | CAP_0603 | C20 |
| 1 | 100pF | CAP_0402 | C27 |
| 2 | * | CAP_0402 | C28, C30 |
| 3 | 100k | RES_0603 | R1, R2, R3 |
| 1 | 0R1 | RES_1206 | R4 |
| 2 | 56k | RES_0603 | R5, R9 |
| 1 | 20k | RES_0603 | R6 |
| 2 | 10k | RES_0603 | R7, R8 |
| 1 | 1k | RES_0603 | R10 |
Silmarili design files
The KiCad project lives in the Kreyl/Silmarili repository on GitHub; these links point at the commit this page was built from.
- NetlistSilmaril_hw/Silmaril.net
Silmarili: common questions
What microcontroller does the Silmarili use?
The Silmarili is built around the stm32L151c8t6, from the STM32 family.
How many components are on the Silmarili?
65 components, from 37 distinct parts. The full bill of materials is listed on this page.
Where can I download the Silmarili design files?
From the Kreyl/Silmarili repository on GitHub, which has a netlist; the links under Design files point to each one.
Can I use the Silmarili design in my own project?
The repository has no license, so all rights stay with Kreyl. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Silmarili without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k