TrafficLight
Kreyl·TrafficLight·TrafficLight_hw/TrafficLight.kicad_pcb
About the TrafficLight PCB
TrafficLight is an open source STM32 PCB design by Kreyl, published on GitHub. It is a 2-layer board measuring 50 × 108 mm, with 72 components from 34 distinct parts.
Its main chip is the STM32L151CxTx, from the STM32 family. By type, the board carries 25 capacitors, 14 resistors, 6 fuses, 3 transistors, 3 test points and 3 inductors.
TrafficLight bill of materials (BOM)
72 components, 34 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BC848 | SOT23-3 | Q1 |
| 2 | MMBT2222 | SOT23-3 | Q2, Q3 |
| 1 | ANT_PCB_MONO | ANT_868_MEANDER_4HOR_35mm | ANT1 |
| 1 | BAT | BAT_HOLDER_3xAA | B1 |
| 1 | 0896BM15A0001 | BALUN_JOHANSON868 | BLN1 |
| 1 | MCP1700 | SOT23-3A | DA1 |
| 1 | STM32L151CxTx | LQFP48 | DD1 |
| 1 | CC1101 | QFN20 | DD2 |
| 6 | Fuse0R | RES_0603_FUSE | F1, F2, F3, F4, F5, F6 |
| 4 | HOLE_METALLED | Hole3_5_out6mm | HOLE1, HOLE2, HOLE3, HOLE4 |
| 1 | SWITCH | SW_SS9 | SW1 |
| 1 | DIPx6 | DIP_SMD_1D27X6 | SW2 |
| 3 | TESTPOINT | TESTPOINT_1MM | TP1, TP2, TP3 |
| 1 | CONN_6 | PLS-6 | XL1 |
| 1 | CONN_3 | PLS-3 | XL5 |
| 1 | CONN_2 | PLS-2 | XL6 |
| 1 | 12.0MHz | 03225C4 | XTAL1 |
| 1 | 27MHz | 03225C4 | XTAL2 |
| 1 | BAT54WS | SOD323 | D7 |
| 2 | BLM15AG102SN1 | IND_0402 | L1, L2 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 5.6nH | IND_0402 | L3 |
| 4 | 1u | CAP_0603 | C1, C14, C16, C23 |
| 1 | 10u | CAP_0603 | C2 |
| 12 | 0.1u | CAP_0603 | C3, C4, C5, C6, C7, C9, C10, C13 +4 |
| 4 | 18pF | CAP_0603 | C8, C15, C19, C20 |
| 1 | 1000u 6v3 | CAP_08xxR | C11 |
| 1 | 10n | CAP_0603 | C12 |
| 1 | 1.8pF | CAP_0402 | C22 |
| 1 | 10u | CAP_0805 | C24 |
| 6 | 100R | RES_0603 | R1, R2, R3, R4, R5, R10 |
| 2 | 100k | RES_0603 | R6, R7 |
| 3 | 1k | RES_0603 | R8, R13, R14 |
| 2 | 56k | RES_0603 | R9, R11 |
| 1 | 10k | RES_0603 | R12 |
TrafficLight design files
The KiCad project lives in the Kreyl/TrafficLight repository on GitHub; these links point at the commit this page was built from.
TrafficLight: common questions
What microcontroller does the TrafficLight use?
The TrafficLight is built around the STM32L151CxTx, from the STM32 family.
How big is the TrafficLight PCB?
The TrafficLight measures 50 × 108 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TrafficLight?
72 components, from 34 distinct parts. The full bill of materials is listed on this page.
Where can I download the TrafficLight design files?
From the Kreyl/TrafficLight repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the TrafficLight design in my own project?
The repository has no license, so all rights stay with Kreyl. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TrafficLight without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k