Keplerx controller panel
About the Keplerx controller panel PCB
Keplerx controller panel is an open source PCB design by kunichiko, published on GitHub under the MIT license. It is a 2-layer board measuring 90 × 50 mm, with 17 components from 15 distinct parts.
By type, the board carries 5 switches, 4 jumpers, 3 connectors, 3 test points and 2 capacitors.
Keplerx controller panel bill of materials (BOM)
17 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HDMI_C_1.3 Conn_02x05_Odd_Even | IDC-Header_2x05_P2.54mm_Latch_Horizontal | J1 |
| 1 | CONN_01X02_MALE Conn_01x04 | PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | C668608 Conn_01x04 | PinSocket_1x04_P2.54mm_Vertical | J3 |
| 2 | 3.3V | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP3 |
| 2 | GND | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2, JP4 |
| 1 | Synth | SW_PUSH_6mm | SW1 |
| 1 | ROM | SW_PUSH_6mm | SW2 |
| 1 | Vol- | SW_PUSH_6mm | SW3 |
| 1 | Vol+ | SW_PUSH_6mm | SW4 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm | SW5 |
| 1 | +5V | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP1 |
| 1 | +3.3V | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP2 |
| 1 | GND | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP3 |
| 1 | 10UF 10uF | CP_EIA-3216-10_Kemet-I | C1 |
| 1 | 100UF 10uF | CP_EIA-3216-10_Kemet-I | C2 |
Keplerx controller panel design files
The KiCad project lives in the kunichiko/X68k-KeplerX-PCB repository on GitHub; these links point at the commit this page was built from.
Keplerx controller panel: common questions
How big is the Keplerx controller panel PCB?
The Keplerx controller panel measures 90 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Keplerx controller panel?
17 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Keplerx controller panel design files?
From the kunichiko/X68k-KeplerX-PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Keplerx controller panel design in my own project?
Yes, under the terms of its MIT license, which kunichiko chose for the repository.
