RGB
kwojcik22·RGB·pcb projects/RGBLED_v1/RGBLED_v1.kicad_pcb
About the RGB PCB
RGB is an open source STM32 PCB design by kwojcik22, published on GitHub. It is a 2-layer board measuring 63 × 43 mm, with 24 components from 19 distinct parts.
Its main chip is the STM32F091RBTx, from the STM32 family. Other key parts include the LM1117T-3.3. By type, the board carries 10 capacitors, 4 resistors, 3 connectors, 2 ICs, 1 crystal and 1 battery holder.
It belongs with the usb & debug tools designs in this gallery.
From the project
This repository contains hardware and firmware for an RGB LED controller based on the STM32F091 microcontroller. The project includes PCB design files, firmware source code, and documentation.
This repository contains hardware and firmware for an RGB LED controller based on the STM32F091 microcontroller. The project includes PCB design files, firmware source code, and documentation.
- pcb projects/ KiCad PCB design files for the RGB LED controller hardware. - RGBLEDv1/ – Main PCB project files and backups. - doc/` – Additional PCB-related documentation.
Main components on the RGB
RGB bill of materials (BOM)
24 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F091RBTx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | LM1117T-3.3 | TO-220-3_Vertical | U3 |
| 1 | 32.768kHz | Crystal_SMD_HC49-SD_HandSoldering | Y1 |
| 1 | USB_B_Micro | USB_Micro-AB_Molex_47590-0001 | CN1 |
| 1 | Conn_01x03_Pin | PinHeader_1x04_P2.54mm_Vertical | CN2 |
| 1 | Conn_02x02_Odd_Even | PinHeader_2x02_P2.54mm_Vertical | J1 |
| 1 | Battery_Cell | BatteryHolder_MYOUNG_BS-07-A1BJ001_CR2032 | BT1 |
| 1 | SW_MEC_5E | SW_MEC_5GSH9 | SW1 |
| 1 | LED_ARGB | PinHeader_1x04_P2.54mm_Vertical | D1 |
| 1 | Ferrite | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | 100uF | CP_EIA-3528-21_Kemet-B_HandSolder | C2 |
| 1 | 10uF | CP_EIA-3528-21_Kemet-B_HandSolder | C3 |
| 4 | 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C5, C6, C7 |
| 1 | 22nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9 |
| 2 | 4.3pF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C10, C11 |
| 1 | 100nF | CP_EIA-3528-21_Kemet-B_HandSolder | C12 |
| 2 | 150 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3 |
| 1 | 470 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
RGB design files
The KiCad project lives in the kwojcik22/RGB repository on GitHub; these links point at the commit this page was built from.
RGB: common questions
What microcontroller does the RGB use?
The RGB is built around the STM32F091RBTx, from the STM32 family.
How big is the RGB PCB?
The RGB measures 63 × 43 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RGB?
24 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the RGB design files?
From the kwojcik22/RGB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the RGB design in my own project?
The repository has no license, so all rights stay with kwojcik22. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the RGB without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k