Smd ledtest
About the Smd ledtest PCB
Smd ledtest is an open source PCB design by kyriosaa, published on GitHub. It is a 2-layer board measuring 101.6 × 97.5 mm, with 14 components from 9 distinct parts.
By type, the board carries 7 resistors, 5 diodes, 1 connector and 1 capacitor.
From the project
Files for learning and future reference
- Schematic design - Component knowledge - PCB layout - Signal integrity - Firmware flashing - Reading datasheets - DFM (Design for Manufacturing)
Smd ledtest bill of materials (BOM)
14 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | RED | LED_0805_2012Metric | D1 |
| 1 | GREEN | LED_0805_2012Metric | D2 |
| 1 | YELLOW | LED_0805_2012Metric | D3 |
| 1 | BLUE | LED_0805_2012Metric | D4 |
| 1 | WHITE | LED_0805_2012Metric | D5 |
| 1 | 10uF | C_0805_2012Metric | C1 |
| 5 | 220 | R_0805_2012Metric | R1, R2, R3, R4, R5 |
| 2 | 5.1K | R_0805_2012Metric | R6, R7 |
Smd ledtest design files
The KiCad project lives in the kyriosaa/practice repository on GitHub; these links point at the commit this page was built from.
Smd ledtest: common questions
How big is the Smd ledtest PCB?
The Smd ledtest measures 101.6 × 97.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Smd ledtest?
14 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Smd ledtest design files?
From the kyriosaa/practice repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Smd ledtest design in my own project?
The repository has no license, so all rights stay with kyriosaa. Use it as a reference, and ask the author before reusing the design.
