Hene HV
About the Hene HV PCB
Hene HV is an open source PCB design by l1g4v, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 132 × 69 mm, with 34 components from 14 distinct parts.
By type, the board carries 15 capacitors, 10 diodes, 5 resistors, 3 connectors and 1 inductor.
From the project
WIP
Hene HV bill of materials (BOM)
34 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Feedback | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Modulation | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Laser | SolderWire-4sqmm_1x02_P12mm_D3mm_OD6mm | J3 |
| 2 | D | DO-206_BD2.0-L4.8-P10.00-D0.5-RD | D1, D2 |
| 6 | D | DIO-TH_BD3.0-L12.0-P16.00-D0.6 | D3, D4, D5, D6, D9, D10 |
| 2 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D7, D8 |
| 1 | HVAC | SolderWire-4sqmm_1x02_P12mm_D3mm_OD6mm | L1 |
| 4 | 10N 10n | C_Disc_D14.5mm_W5.0mm_P10.00mm | C1, C2, C4, C5 |
| 9 | 2.2N 2.2n | C_Disc_D14.5mm_W5.0mm_P10.00mm | C3, C6, C7, C8, C9, C12, C15, C16 +1 |
| 2 | 10U 10u | C_1206_3216Metric | C10, C11 |
| 1 | 6M | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 2k | R_Axial_DIN0617_L17.0mm_D6.0mm_P20.32mm_Horizontal | R2 |
| 2 | 25 | R_0805_2012Metric | R3, R4 |
| 1 | 22K 22k | R_Axial_DIN0617_L17.0mm_D6.0mm_P20.32mm_Horizontal | R5 |
Hene HV design files
The KiCad project lives in the l1g4v/HeNe-PowerSupply repository on GitHub; these links point at the commit this page was built from.
Hene HV: common questions
How big is the Hene HV PCB?
The Hene HV measures 132 × 69 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hene HV?
34 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hene HV design files?
From the l1g4v/HeNe-PowerSupply repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hene HV design in my own project?
Yes, under the terms of its GPL-3.0 license, which l1g4v chose for the repository.
