Fuelcell controller hw

Lab-FuelCell-ITS·fuelcell_controller_hw

Fuelcell controller hw PCB layout, top view — open source STM32 board by Lab-FuelCell-ITS

About the Fuelcell controller hw PCB

Fuelcell controller hw is an open source STM32 PCB design by Lab-FuelCell-ITS, published on GitHub. It is a 2-layer board measuring 158.9 × 106.7 mm, with 34 components from 17 distinct parts.

Its main chip is the STM32F4HEAD, from the STM32 family. Other key parts include the W25Q16JVSS. By type, the board carries 20 connectors, 8 ICs and 6 resistors.

From the project

This repository contains the KiCad schematic and PCB hardware design for the Fuel Cell Controller developed by Lab-FuelCell-ITS. The project includes complete KiCad source files, symbol/footprint libraries, and backups used for designing, modifying, and fabricating the controller

This repository contains the KiCad schematic and PCB hardware design for the Fuel Cell Controller developed by Lab-FuelCell-ITS. The project includes complete KiCad source files, symbol/footprint libraries, and backups used for designing, modifying, and fabricating the controller board.

- Full KiCad project (schematics + PCB layout) - Custom symbol and footprint libraries - Backup snapshots for restoration - Ready for Gerber and BOM generation - Structured for collaboration and long-term maintenance

Fuelcell controller hw, from the project README
From the project README

Main components on the Fuelcell controller hw

Fuelcell controller hw bill of materials (BOM)

34 components, 17 distinct parts.

QtyPartRefs
1
W25Q16JVSS
U1
1
~
U2
2
~
U3, U6
2
~
U4, U7
1
~
U5
1
~
U8
3
Screw_Terminal_01x02
J1, J10, J13
1
Screw_Terminal_01x10
J2
3
Conn_01x04
J3, J15, J16
4
Conn_01x03
J4, J5, J6, J7
2
Conn_01x06
J8, J9
2
Conn_01x03_Pin
J11, J12
1
USB_A
J14
1
Micro_SD_Card
J17
3
Conn_01x10_Pin
J18, J19, J20
4
10k
R1, R2, R3, R4
2
120
R5, R6

Fuelcell controller hw design files

The KiCad project lives in the Lab-FuelCell-ITS/fuelcell_controller_hw repository on GitHub; these links point at the commit this page was built from.

Fuelcell controller hw: common questions

What microcontroller does the Fuelcell controller hw use?

The Fuelcell controller hw is built around the STM32F4HEAD, from the STM32 family.

How big is the Fuelcell controller hw PCB?

The Fuelcell controller hw measures 158.9 × 106.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Fuelcell controller hw?

34 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the Fuelcell controller hw design files?

From the Lab-FuelCell-ITS/fuelcell_controller_hw repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Fuelcell controller hw design in my own project?

The repository has no license, so all rights stay with Lab-FuelCell-ITS. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Fuelcell controller hw without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards