I-O Board V3.0
Lafayette-Motorsports·LVBoards·LM0/New LV Board/I-O Board V3.0/I-O Board V3.0.kicad_pcb
About the I-O Board V3.0
I-O Board V3.0 is an open source PCB design by Lafayette-Motorsports, published on GitHub. It is a 2-layer board measuring 58.1 × 143.4 mm, with 23 components from 14 distinct parts.
By type, the board carries 13 connectors, 6 resistors and 1 fuse.
From the project
LV Board repository for Motorsports created 09.02.2025
LV Board repository for Motorsports created 09.02.2025
for repository admin (or other) questions - Sean McLoughlin mclougsm@lafayette.edu
I-O Board V3.0 bill of materials (BOM)
23 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_01X02_PIN PH1-10-UA | HDRV10W64P0X254_1X10_2540X249X886P | J1 |
| 3 | * | AMPHENOL_L717SDA15P1ACH4F | J1-A1, J2-A1, J3-A1 |
| 3 | Conn_01x15 | JST_PH_B15B-PH-K_1x15_P2.00mm_Vertical | J1-B1, J2-B1, J3-B1 |
| 1 | L717SDA15P1ACH4F 2604-1101 | CONN_2604-1101_WAG | J4 |
| 2 | CONN_01X02_PIN 2604-1101 | CONN_2604-1101_WAG | J5, J6 |
| 3 | CONN_01X02 2604-1101 | CONN_2604-1101_WAG | J7, J8, J9 |
| 1 | 20A | 3568_KEY | F1 |
| 2 | 20-0600-21 | CONN_20-0600-21_ARS | PH2, PH3 |
| 1 | 1X10-2.54MM-THT | 1X10-2.54MM-THT | PH4 |
| 1 | 10K 3.01k | YAG_MF25_YAG | R1 |
| 1 | 57.6K 10k | YAG_MF25_YAG | R2 |
| 1 | 22K 120 | RESC3116X65N | R3 |
| 1 | 57.6K 120 | RESC3116X65N | R4 |
| 2 | 120 | RESC3116X65N | R5, R6 |
I-O Board V3.0 design files
The KiCad project lives in the Lafayette-Motorsports/LVBoards repository on GitHub; these links point at the commit this page was built from.
I-O Board V3.0: common questions
How big is the I-O Board V3.0?
The I-O Board V3.0 measures 58.1 × 143.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the I-O Board V3.0?
23 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the I-O Board V3.0 design files?
From the Lafayette-Motorsports/LVBoards repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the I-O Board V3.0 design in my own project?
The repository has no license, so all rights stay with Lafayette-Motorsports. Use it as a reference, and ask the author before reusing the design.
More boards in LVBoards
LV Board Mk2
Lafayette-Motorsports
263 × 139.8 mm178 parts4LNo license1LV Charge Board
Lafayette-Motorsports
143.7 × 95.5 mm83 parts4LNo license1Precharge
Lafayette-Motorsports
83.3 × 41.3 mm28 parts2LNo license1IMD & AMS Latches V1.1
Lafayette-Motorsports
46 × 51.3 mm20 parts2LNo license1IO Module V2.0
Lafayette-Motorsports
58.1 × 146.2 mm18 parts2LNo license1VCU Signals V1.0
Lafayette-Motorsports
46 × 51.3 mm15 parts2LNo license1Astable Multivibrator
Lafayette-Motorsports
60.8 × 36.2 mm11 parts2LNo license1Traces V1.0
Lafayette-Motorsports
101.6 × 50.8 mm10 parts2LNo license1VCU MPR - 5V V1.0
Lafayette-Motorsports
45.4 × 50.4 mm8 parts2LNo license1Hall Effect Sensor
Lafayette-Motorsports
34.9 × 46 mm6 parts2LNo license1Throttle Latching Module V3.1
Lafayette-Motorsports
46 × 25 mm6 parts2LNo license1