LEC009-programming jig
About the LEC009-programming jig PCB
LEC009-programming jig is an open source PCB design by LECTIX, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 69 × 50 mm, with 19 components from 2 distinct parts.
By type, the board carries 18 test points and 1 connector.
From the project
- Distance de détection réglable jusqu’à 10 cm - Fonctionne même à la lumière du jour! - Temporisation à la désactivation pour éviter des réactivations intempestives. - 2 modes de fonctionnements :
- Distance de détection réglable jusqu’à 10 cm - Fonctionne même à la lumière du jour! - Temporisation à la désactivation pour éviter des réactivations intempestives. - 2 modes de fonctionnements :
1. Mode direct (1 capteur) le relais est commuté lorsqu’un objet se trouve en face du capteur. Le relais est relâché lorsqu’il n’y a plus d’obstacles devant le capteur. 2. Mode bistable (2 capteurs) Le relais est relâché lorsqu’un objet passe devant le second capteur.
LEC009-programming jig bill of materials (BOM)
19 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C395849 Conn_01x18_Female | PinHeader_1x18_P2.54mm_Vertical | J1 |
| 18 | TestPoint_Probe | pogo-1mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +10 |
LEC009-programming jig design files
The KiCad project lives in the LECTIX/LEC009002-D-tecteur-IR repository on GitHub; these links point at the commit this page was built from.
LEC009-programming jig: common questions
How big is the LEC009-programming jig PCB?
The LEC009-programming jig measures 69 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LEC009-programming jig?
19 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LEC009-programming jig design files?
From the LECTIX/LEC009002-D-tecteur-IR repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the LEC009-programming jig design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which LECTIX chose for the repository.
