SkyGuard Cutdown Pro Electronics
About the SkyGuard Cutdown Pro Electronics PCB
SkyGuard Cutdown Pro Electronics is an open source PCB design by LeemanGeophysicalLLC, published on GitHub under the MIT license. It is a 2-layer board measuring 50.8 × 114.3 mm, with 80 components from 44 distinct parts.
Other key parts include the 1-0001505, 1-0001471, 1-0000779, 1-0000446 and 1-0001703. By type, the board carries 30 resistors, 19 capacitors, 10 connectors, 7 ICs, 7 diodes and 4 transistors.
From the project
SkyGuard Cutdown Pro high altitude balloon flight termination device
Main components on the SkyGuard Cutdown Pro Electronics
SkyGuard Cutdown Pro Electronics bill of materials (BOM)
80 components, 44 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1-0001505 | 1-0001505 | U1 |
| 1 | 1-0001471 | 1-0001471 | U2 |
| 1 | 1-0000779 | 1-0000779 | U3 |
| 1 | 1-0000446 | 1-0000446 | U4 |
| 1 | 1-0001703 | 1-0001703 | U5 |
| 1 | 1-0001649 | 1-0001649 | U6 |
| 1 | 1-0000658 | 1-0000658 | U7 |
| 1 | 1-0001787 | 1-0001787 | Q1 |
| 2 | 1-0000340 | 1-0000340 | Q2, Q3 |
| 1 | 1-0000505 | 1-0000505 | Q4 |
| 1 | 1-0001506 | 1-0001506 | J1 |
| 1 | 1-0001205 | 1-0001205 | J2 |
| 1 | 0-0000000 NP_Conn_01x03 | PinHeader_1x03_P2.54mm_Horizontal | J3 |
| 2 | 1-0000526 | 1-0000526 | J4, J5 |
| 1 | 1-0001788 | 1-0001788 | J6 |
| 1 | 1-0000790 | 1-0000790 | J7 |
| 1 | 1-0000190 | 1-0000190 | J8 |
| 2 | 0-0000000 NP_Conn_01x02_Relief | SolderWire_1x02_LargeHole | J9, J10 |
| 1 | 1-0000246 | 1-0000246 | BT1 |
| 1 | 3-0000290 barepcb | barepcb | PCB1 |
Show 24 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1-0000680 | 1-0000680 | SW1 |
| 1 | 1-0000399 | 1-0000399 | D1 |
| 1 | 1-0000601 | 1-0000601 | D2 |
| 1 | 1-0000600 | 1-0000600 | D3 |
| 3 | 1-0001468 | 1-0001468 | D4, D5, D6 |
| 1 | 1-0001466 | 1-0001466 | D7 |
| 1 | 1-0000016 | 1-0000016 | C1 |
| 2 | 1-0000017 | 1-0000017 | C2, C3 |
| 8 | 1-0000007 | 1-0000007 | C4, C5, C7, C8, C9, C10, C12, C14 |
| 2 | 1-0000018 | 1-0000018 | C6, C11 |
| 1 | 1-0000015 | 1-0000015 | C13 |
| 1 | 1-0001469 | 1-0001469 | C15 |
| 3 | 1-0000075 | 1-0000075 | C16, C17, C19 |
| 1 | 1-0000738 | 1-0000738 | C18 |
| 1 | 1-0000009 | 1-0000009 | R1 |
| 3 | 1-0000679 | 1-0000679 | R2, R3, R7 |
| 2 | 1-0000012 | 1-0000012 | R4, R5 |
| 4 | 1-0000006 | 1-0000006 | R6, R14, R15, R19 |
| 6 | 1-0000010 | 1-0000010 | R8, R9, R16, R17, R18, R22 |
| 2 | 1-0000008 | 1-0000008 | R10, R11 |
| 6 | 1-0000013 | 1-0000013 | R12, R13, R23, R24, R25, R26 |
| 2 | 1-0000027 | 1-0000027 | R20, R21 |
| 3 | 1-0000174 | 1-0000174 | R27, R28, R30 |
| 1 | 1-0001470 | 1-0001470 | R29 |
SkyGuard Cutdown Pro Electronics design files
The KiCad project lives in the LeemanGeophysicalLLC/SkyGuard_Cutdown_Pro_Electronics repository on GitHub; these links point at the commit this page was built from.
SkyGuard Cutdown Pro Electronics: common questions
How big is the SkyGuard Cutdown Pro Electronics PCB?
The SkyGuard Cutdown Pro Electronics measures 50.8 × 114.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SkyGuard Cutdown Pro Electronics?
80 components, from 44 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SkyGuard Cutdown Pro Electronics design files?
From the LeemanGeophysicalLLC/SkyGuard_Cutdown_Pro_Electronics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SkyGuard Cutdown Pro Electronics design in my own project?
Yes, under the terms of its MIT license, which LeemanGeophysicalLLC chose for the repository.