Flight-Controller-OMO
LeonOmo·Flight-Controller-OMO·PCB/Flightcontroller v1/Flightcontroller v1.kicad_pcb
About the Flight-Controller-OMO PCB
Flight-Controller-OMO is an open source STM32 PCB design by LeonOmo, published on GitHub. It is a 2-layer board measuring 39.6 × 31.4 mm, with 17 components from 12 distinct parts.
Its main chip is the C60420, from the STM32 family. Other key parts include the C82942 and C2836813. By type, the board carries 7 resistors, 3 ICs, 3 capacitors, 2 diodes, 1 crystal and 1 connector.
It belongs with the robotics & motion and sensors designs in this gallery.
From the project
A custom designed, minimalistic STM32F411-based flight controller built from scratch for custom drone and aerospace experimentation.
A custom designed, minimalistic STM32F411-based flight controller built from scratch for custom drone and aerospace experimentation.
Flight Controller OMO: is a custom made circuit board designed specifically to act as an stabilization unit for stabilising platforms. It breaks away from bulky flight controllers by packing only the essential, minimal form factor powered by an STM32 microcontroller and a modern BMI270.
Main components on the Flight-Controller-OMO
Flight-Controller-OMO bill of materials (BOM)
17 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C60420 STM32F411CEUx | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U2 |
| 1 | C82942 AMS1117CD-3.3 | SOT-23-5 | U3 |
| 1 | C2836813 BMI270 | XDCR_BMI270 | U4 |
| 1 | C13738 Crystal_GND24 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | C5184243 USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 2 | C2290 LED | LED_0603_1608Metric | D1, D2 |
| 2 | C19702 10 uF | C_0603_1608Metric | C5, C6 |
| 1 | C23630 2.2uF | C_0603_1608Metric | C7 |
| 1 | C22935 1M | R_0603_1608Metric | R3 |
| 2 | C23186 5.1k | R_0603_1608Metric | R4, R5 |
| 2 | C25804 10k | R_0603_1608Metric | R6, R7 |
| 2 | C21190 1k | R_0603_1608Metric | R8, R9 |
Flight-Controller-OMO design files
The KiCad project lives in the LeonOmo/Flight-Controller-OMO repository on GitHub; these links point at the commit this page was built from.
Flight-Controller-OMO: common questions
What microcontroller does the Flight-Controller-OMO use?
The Flight-Controller-OMO is built around the C60420, from the STM32 family.
How big is the Flight-Controller-OMO PCB?
The Flight-Controller-OMO measures 39.6 × 31.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Flight-Controller-OMO?
17 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Flight-Controller-OMO design files?
From the LeonOmo/Flight-Controller-OMO repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Flight-Controller-OMO design in my own project?
The repository has no license, so all rights stay with LeonOmo. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Flight-Controller-OMO without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k