Digital Input Prototyp
About the Digital Input Prototyp PCB
Digital Input Prototyp is an open source PCB design by LeoWatti99, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 55 × 42 mm, with 40 components from 16 distinct parts.
Other key parts include the ISO1I813T. By type, the board carries 23 resistors, 11 LEDs, 3 connectors, 2 capacitors and 1 IC.
Main components on the Digital Input Prototyp
Digital Input Prototyp bill of materials (BOM)
40 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ISO1I813T | SOP50P810X110-48N | IC1 |
| 1 | Conn_01x08_Socket | PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x10 | PinHeader_1x10_P2.54mm_Vertical | J3 |
| 8 | 156120YS75000 | LEDM3216X130N | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 |
| 2 | 156120RS75000 | LEDM3216X130N | LED9, LED10 |
| 1 | 156120GS75000 | LEDM3216X130N | LED11 |
| 1 | GRM3195C2A104JA01D 100n | C_1206_3216Metric | C1 |
| 1 | C1206X334J1RECAUTO 330n | C_1206_3216Metric | C2 |
| 8 | RC1206FR-0712KL 12k | R_1206_3216Metric | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | RT1206FRE072KL 2k | R_1206_3216Metric | R9, R10, R11, R12, R13, R14, R15, R16 |
| 1 | RT1206FRE0740K2L 40k | R_1206_3216Metric | R17 |
| 2 | AC1206FR-07470RL 470 | R_1206_3216Metric | R18, R20 |
| 2 | RT1206FRD0722KL 22k | R_1206_3216Metric | R19, R23 |
| 1 | RC1206FR-10330KL 330k | R_1206_3216Metric | R21 |
| 1 | AC1206FR-07100RL 100 | R_1206_3216Metric | R22 |
Digital Input Prototyp design files
The KiCad project lives in the LeoWatti99/CANTram-Framework repository on GitHub; these links point at the commit this page was built from.
Digital Input Prototyp: common questions
How big is the Digital Input Prototyp PCB?
The Digital Input Prototyp measures 55 × 42 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Digital Input Prototyp?
40 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Digital Input Prototyp design files?
From the LeoWatti99/CANTram-Framework repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Digital Input Prototyp design in my own project?
Yes, under the terms of its GPL-3.0 license, which LeoWatti99 chose for the repository.
More boards in CANTram-Framework
Analogmodul
100 × 38 mm73 parts2LGPL-3.00
Digitalmodul
100 × 38 mm71 parts2LGPL-3.00
Hauptmodul
100 × 61 mm47 parts2LGPL-3.00
Analog Input Prototyp
45.5 × 37.3 mm35 parts2LGPL-3.00
Busmodul
100 × 38 mm32 parts2LGPL-3.00
Digital Output Prototyp V2
65 × 37 mm30 parts2LGPL-3.00
Relaismodul
100 × 38 mm29 parts2LGPL-3.00
ESP32ESP Interface Board
69 × 86 mm21 parts2LGPL-3.00
CAN Tram Adapter
57.5 × 26 mm6 parts2LGPL-3.00
Debugmodul
100 × 38 mm3 parts2LGPL-3.00