Digitalmodul
About the Digitalmodul PCB
Digitalmodul is an open source PCB design by LeoWatti99, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 100 × 38 mm, with 71 components from 23 distinct parts.
Other key parts include the ISO1I813T and ISO1H816G. By type, the board carries 35 resistors, 20 diodes, 6 connectors, 4 capacitors, 3 LEDs and 2 ICs.
Main components on the Digitalmodul
Digitalmodul bill of materials (BOM)
71 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ISO1I813T | SOP50P810X110-48N | IC1 |
| 1 | ISO1H816G | SOP65P1420X350-37N | IC2 |
| 1 | FQD8P10TM | DPAK3-CASE-369AS | Q1 |
| 1 | 39502-1002 | SHDR2W80P0X350_1X2_840X920X690P | J1 |
| 3 | 39502-1004 | SHDRRA4W80P0X350_1X4_1540X920X730P | J3, J5, J6 |
| 1 | 658855603040 | 658855603040 | J4 |
| 1 | 658801103040 | 658801103040 | J7 |
| 2 | 156120GS75000 | LEDC5017X140N | LED1, LED3 |
| 1 | 156120RS75000 | LEDC5017X140N | LED2 |
| 8 | SS24FL | SODFL3617X108N | D9, D10, D11, D12, D13, D14, D15, D16 |
| 12 | 156120YS75000 | LEDC5017X140N | D17, D18, D19, D20, D21, D22, D23, D24 +4 |
| 2 | 100n | C_1206_3216Metric | C1, C4 |
| 1 | 470n | C_1206_3216Metric | C2 |
| 1 | 330n | C_1206_3216Metric | C3 |
| 1 | AC1206FR-076K2L 6,2k | R_1206_3216Metric | R1 |
| 9 | AC1206FR-076K2L 2k | R_1206_3216Metric | R2, R4, R7, R9, R13, R15, R17, R19 +1 |
| 12 | AC1206FR-076K2L 12k | R_1206_3216Metric | R3, R6, R8, R10, R14, R16, R18, R20 +4 |
| 1 | RT1206FRD0722KL 22k | R_1206_3216Metric | R5 |
| 1 | AC1206FR-076K2L 40k | R_1206_3216Metric | R11 |
| 1 | AC1206FR-076K2L 330k | R_1206_3216Metric | R12 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AC1206FR-076K2L 100 | R_1206_3216Metric | R21 |
| 8 | RT1206FRD0722KL 100k | R_1206_3216Metric | R22, R23, R24, R25, R26, R27, R28, R29 |
| 1 | AC1206FR-076K2L 4,7k | R_1206_3216Metric | R42 |
Digitalmodul design files
The KiCad project lives in the LeoWatti99/CANTram-Framework repository on GitHub; these links point at the commit this page was built from.
Digitalmodul: common questions
How big is the Digitalmodul PCB?
The Digitalmodul measures 100 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Digitalmodul?
71 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Digitalmodul design files?
From the LeoWatti99/CANTram-Framework repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Digitalmodul design in my own project?
Yes, under the terms of its GPL-3.0 license, which LeoWatti99 chose for the repository.
More boards in CANTram-Framework
Analogmodul
100 × 38 mm73 parts2LGPL-3.00
Hauptmodul
100 × 61 mm47 parts2LGPL-3.00
Digital Input Prototyp
55 × 42 mm40 parts2LGPL-3.00
Analog Input Prototyp
45.5 × 37.3 mm35 parts2LGPL-3.00
Busmodul
100 × 38 mm32 parts2LGPL-3.00
Digital Output Prototyp V2
65 × 37 mm30 parts2LGPL-3.00
Relaismodul
100 × 38 mm29 parts2LGPL-3.00
ESP32ESP Interface Board
69 × 86 mm21 parts2LGPL-3.00
CAN Tram Adapter
57.5 × 26 mm6 parts2LGPL-3.00
Debugmodul
100 × 38 mm3 parts2LGPL-3.00