IsoSwitch
lilltroll77·IsoSwitch·HW/HW.kicad_pcb
About the IsoSwitch PCB
IsoSwitch is an open source PCB design by lilltroll77, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 62 × 49.8 mm, with 130 components from 30 distinct parts.
Other key parts include the XL216-512-TQ128_CHIP_VIEW, ST1S06, APX811-46UG-7, NCP303LSN10T and KSZ8081MNX. By type, the board carries 70 capacitors, 34 resistors, 9 ICs, 6 connectors, 6 inductors and 1 crystal.
It belongs with the iot & wireless designs in this gallery.
From the project
Globally scalable mesh networking
This code is not yet useful as a switch: It only runs under an XMOS simulator.
Our initial plan is to give low cost (or free) CrowdSwitches to low income residents of extremely high-density urban communities. The best funding model still isn't clear, but we intend to build it within a 501(c)(3) organization to make our altruistic motives super clear. - 4-port auto-configuring switch - 3x RJ45 ~100 Mbps full-duplex ethernet PHY with 1ms worst-case switching latency - 1x RJ45 ~25 Mbps full-duplex Ethernet connection to an external controller PC or SoC with 8ms worst-case switching latency -…

Main components on the IsoSwitch
IsoSwitch bill of materials (BOM)
130 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XL216-512-TQ128_CHIP_VIEW | TQFP-128_14x14mm_Pitch0.4mm | U1 |
| 2 | ST1S06 | DFN6D_3x3mm | U2, U3 |
| 1 | APX811-46UG-7 | SOT-143 | U4 |
| 1 | NCP303LSN10T | TSOP-5_1.65x3.05mm_Pitch0.95mm | U5 |
| 4 | KSZ8081MNX | QFN-32-1EP_5x5mm_Pitch0.5mm | U10, U11, U12, U13 |
| 1 | DSC6001CI2A-025.0000 | Oscillator_SMD_Abracon_ASE-4pin_3.2x2.5mm | X1 |
| 1 | 10118193-0001LF | FCI_10118193-0001LF | J1 |
| 1 | 2x10 Vertical Pin | Pin_Header_Straight_2x10_Pitch2.54mm | J2 |
| 4 | RJ45_0 | RJ45_LINK-PP | J10, J11, J12, J13 |
| 1 | 1206L110 | Fuse_SMD1206_Reflow | F1 |
| 2 | — | 1pin | Mount2, Mount3 |
| 1 | V5.5MLA0603H | R_0603 | RV1 |
| 4 | FERRITE BEAD | L_0603 | FB101, FB111, FB121, FB131 |
| 2 | 3.3uH | L_Taiyo-Yuden_NR-40xx | L1, L2 |
| 2 | 4.7uF | C_0805 | C1, C3 |
| 10 | 22uF | C_0805 | C2, C4, C105, C107, C115, C117, C125, C127 +2 |
| 23 | 100nF | C_0201 | C5, C6, C70, C71, C72, C73, C74, C75 +15 |
| 6 | 2.2uF | C_0603 | C7, C8, C101, C111, C121, C131 |
| 29 | 100nF | C_0402 | C50, C51, C52, C53, C54, C55, C56, C57 +21 |
| 1 | 4.7K | R_0603 | R1 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 18K | R_0603 | R2, R4 |
| 9 | 1K | R_0603 | R3, R103, R104, R113, R114, R123, R124, R133 +1 |
| 1 | 5.6K | R_0603 | R5 |
| 1 | 2.2K | R_0603 | R6 |
| 1 | 47K | R_0603 | R7 |
| 1 | 4.7R | R_0201 | R8 |
| 9 | 33R | R_0603 | R9, R105, R106, R115, R116, R125, R126, R135 +1 |
| 1 | 3.3K | R_0603 | R10 |
| 4 | 6.49K | R_0603 | R101, R111, R121, R131 |
| 4 | 10K | R_0603 | R102, R112, R122, R132 |
IsoSwitch design files
The KiCad project lives in the lilltroll77/IsoSwitch repository on GitHub; these links point at the commit this page was built from.
- LayoutHW/HW.kicad_pcb
IsoSwitch: common questions
How big is the IsoSwitch PCB?
The IsoSwitch measures 62 × 49.8 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the IsoSwitch?
130 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the IsoSwitch design files?
From the lilltroll77/IsoSwitch repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the IsoSwitch design in my own project?
Yes, under the terms of its GPL-3.0 license, which lilltroll77 chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kL0 USB
Luos-io
20.3 × 15.3 mm19 parts2LMIT547Breakout board
Luos-io
26.7 × 27.9 mm29 parts2LMIT547Stm32f0 disco Luos shield
Luos-io
55.9 × 99.1 mm26 parts2LMIT547L0 USBA
Luos-io
20.3 × 15.3 mm19 parts2LMIT547