ZX-Interface-1-Narrow-PLCC
liveboxandy·ZX-Interface-1-Narrow-PLCC
About the ZX-Interface-1-Narrow-PLCC PCB
ZX-Interface-1-Narrow-PLCC is an open source PCB design by liveboxandy, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 74.4 × 130.2 mm, with 79 components from 32 distinct parts.
Other key parts include the LA15-302, SST39SF040-70-4C-PHE, SN74LS27D and SN74HCU04DR. By type, the board carries 41 resistors, 11 diodes, 9 transistors, 6 capacitors, 4 ICs and 3 connectors.
From the project
ZX Interface 1 recreated with Standard Edge Connector, PLCC ROM with narrow width to not obscure Tape In/Out
The schematic available from the Service Guide was redrawn in Kicad and used to create the PCB and to verify that the routing was correct and that no components were missed.
Sometimes Kicad complains that there is an issue with the edge.cuts file. Running DRC will show what it doesn't like and it's easy to fix so that the board outline is a closed shape. Currently the pcb is just small enough for JLCPCB to treat it as a prototype for lower pricing.

Main components on the ZX-Interface-1-Narrow-PLCC
ZX-Interface-1-Narrow-PLCC bill of materials (BOM)
79 components, 32 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LA15-302 | DIP-40_W15.24mm | U1 |
| 1 | SST39SF040-70-4C-PHE SST39SF040 | MC32PLCC | U2 |
| 1 | SN74LS27D 74LS27 | SOIC127P600X175-14N | U3 |
| 1 | SN74HCU04DR | SOIC127P600X175-14N | U4 |
| 4 | BC807-40,215 BC807-40 | SOT95P230X110-3N | Q1, Q2, Q4, Q5 |
| 3 | BC850C,215 BC850C | BC850C215 | Q3, Q6, Q9 |
| 2 | SST3904HZGT116 SST3904 | SOT95P240X120-3N | Q10, Q11 |
| 1 | 830202129201 8Mhz | 830202129201 | X1 |
| 1 | Microdrive | ZX_MD_Edge_Connector | SK4 |
| 1 | ZX Spectrum | ZX_Spectrum_BUS_Edge_Connector | SK5 |
| 1 | ZX Expansion | ZX_Expansion_BUS_Edge_Connector | SK6 |
| 2 | MJ-3502N | MJ3502N | SK2, SK3 |
| 1 | A6FR-5104 SW_DIP_x05 | A6FR5104 | SW1 |
| 2 | SS2FH6-M3/H SS2FH6 | SODFL3718X108N | D1, D2 |
| 6 | 1N4148WS 1N4148 | SODFL2512X90N | D3, D4, D5, D9, D10, D11 |
| 3 | BZY55C4V3 RBG BZY55C4V3 | DIOC2012X85N | D6, D7, D8 |
| 1 | LQH2MPN220MGRL 22uH 0.41A | LQH2MCN100K02L | L1 |
| 3 | 293D476X9016D2TE3 47uF 16V | CAPPM7343X310N | C1, C2, C6 |
| 1 | C1206C473K5RACTU 47nF | C1206 | C5 |
| 2 | C3216C0G2J331J060AA 330pF | CAPC3317X75N | C7, C8 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | CRCW12061K00FKEAC 1K0 | RESC3216X60N | R1, R3, R5, R11, R14, R19, R31 |
| 3 | CRGH1206F330R 330R | RESC3116X65N | R2, R22, R23 |
| 4 | CRCW12063K90FKEA 3K9 | RESC3216X60N | R4, R6, R8, R16 |
| 1 | RCC120647R0FKEA 47R | RCC1206_e3 | R7 |
| 14 | CRG1206F10K 10K | RESC3116X65N | R9, R21, R25, R26, R27, R33, R36, R37 +6 |
| 1 | CRCW12062K20FKEA 2K2 | RESC3216X60N | R10 |
| 2 | CRCW120612K4FKEAC 12K | RESC3216X60N | R12, R15 |
| 3 | CRGH1206F680R 680R | RESC3116X65N | R13, R18, R32 |
| 2 | CRGH1206F2K7 2K7 | RESC3116X65N | R17, R20 |
| 1 | CRGS1206J4K7 4K7 | RESC3116X65N | R24 |
| 2 | CRG1206F6K8 6K8 | RESC3116X65N | R28, R29 |
| 1 | CRCW1206270RFKEA 270R | RESC3216X60N | R30 |
ZX-Interface-1-Narrow-PLCC design files
The KiCad project lives in the liveboxandy/ZX-Interface-1-Narrow-PLCC repository on GitHub; these links point at the commit this page was built from.
ZX-Interface-1-Narrow-PLCC: common questions
How big is the ZX-Interface-1-Narrow-PLCC PCB?
The ZX-Interface-1-Narrow-PLCC measures 74.4 × 130.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ZX-Interface-1-Narrow-PLCC?
79 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ZX-Interface-1-Narrow-PLCC design files?
From the liveboxandy/ZX-Interface-1-Narrow-PLCC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ZX-Interface-1-Narrow-PLCC design in my own project?
Yes, under the terms of its CC0-1.0 license, which liveboxandy chose for the repository.