ZX-Interface-1-Renewed-DIP

liveboxandy·ZX-Interface-1-Renewed-DIP

ZX-Interface-1-Renewed-DIP PCB layout, top view — open source board by liveboxandy

About the ZX-Interface-1-Renewed-DIP PCB

ZX-Interface-1-Renewed-DIP is an open source PCB design by liveboxandy, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 100 × 100 mm, with 79 components from 32 distinct parts.

Other key parts include the LA15-302, SST39SF040-70-4C-PHE, SN74LS27D and SN74HCU04DR. By type, the board carries 41 resistors, 11 diodes, 9 transistors, 6 capacitors, 4 ICs and 3 connectors.

From the project

ZX Interface 1 using DIP ROM Chip

The schematic available from the Service Guide was redrawn in Kicad and used to create the PCB and to verify that the routing was correct and that no components were missed.

Sometimes Kicad complains that there is an issue with the edge.cuts file. Running DRC will show what it doesn't like and it's easy to fix so that the board outline is a closed shape. Currently the pcb is just small enough for JLCPCB to treat it as a prototype for lower pricing.

ZX-Interface-1-Renewed-DIP, from the project README
From the project README

Main components on the ZX-Interface-1-Renewed-DIP

ZX-Interface-1-Renewed-DIP bill of materials (BOM)

79 components, 32 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LA15-302
U1
1
SST39SF040-70-4C-PHE
SST39SF040
U2
1
SN74LS27D
74LS27
U3
1
SN74HCU04DR
U4
4
BC807-40,215
BC807-40
Q1, Q2, Q4, Q5
3
BC850C,215
BC850C
Q3, Q6, Q9
2
SST3904HZGT116
SST3904
Q10, Q11
1
830202129201
8Mhz
X1
1
Microdrive
SK4
1
ZX Spectrum
SK5
1
ZX Expansion
SK6
2
MJ-3502N
SK2, SK3
1
A6FR-5104
SW_DIP_x05
SW1
2
SS2FH6-M3/H
SS2FH6
D1, D2
6
1N4148WS
1N4148
D3, D4, D5, D9, D10, D11
3
BZY55C4V3 RBG
BZY55C4V3
D6, D7, D8
1
LQH2MPN220MGRL
22uH 0.41A
L1
3
293D476X9016D2TE3
47uF 16V
C1, C2, C6
1
C1206C473K5RACTU
47nF
C5
2
C3216C0G2J331J060AA
330pF
C7, C8
Show 12 more
QtyPartRefs
7
CRCW12061K00FKEAC
1K0
R1, R3, R5, R11, R14, R19, R31
3
CRGH1206F330R
330R
R2, R22, R23
4
CRCW12063K90FKEA
3K9
R4, R6, R8, R16
1
RCC120647R0FKEA
47R
R7
14
CRG1206F10K
10K
R9, R21, R25, R26, R27, R33, R36, R37 +6
1
CRCW12062K20FKEA
2K2
R10
2
CRCW120612K4FKEAC
12K
R12, R15
3
CRGH1206F680R
680R
R13, R18, R32
2
CRGH1206F2K7
2K7
R17, R20
1
CRGS1206J4K7
4K7
R24
2
CRG1206F6K8
6K8
R28, R29
1
CRCW1206270RFKEA
270R
R30

ZX-Interface-1-Renewed-DIP design files

The KiCad project lives in the liveboxandy/ZX-Interface-1-Renewed-DIP repository on GitHub; these links point at the commit this page was built from.

ZX-Interface-1-Renewed-DIP: common questions

How big is the ZX-Interface-1-Renewed-DIP PCB?

The ZX-Interface-1-Renewed-DIP measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ZX-Interface-1-Renewed-DIP?

79 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ZX-Interface-1-Renewed-DIP design files?

From the liveboxandy/ZX-Interface-1-Renewed-DIP repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ZX-Interface-1-Renewed-DIP design in my own project?

Yes, under the terms of its CC0-1.0 license, which liveboxandy chose for the repository.