Ss front panel
About the Ss front panel PCB
Ss front panel is an open source PCB design by loopj, published on GitHub under the SHL-2.1 license. It is a 2-layer board measuring 63.3 × 15 mm, with 13 components from 9 distinct parts.
By type, the board carries 3 switches, 3 diodes, 3 capacitors, 3 resistors and 1 connector.
From the project
World's Smallest Nintendo Wii, using a trimmed motherboard and custom stacked PCBs
This folder contains the KiCad schematic and PCB layout for the Short Stack front panel PCB.
Ss front panel bill of materials (BOM)
13 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 5014610891 Main PCB Molex | 5034800800 | J1 |
| 3 | R-668048 SW_Push Mitsumi Electric Company Ltd | R668048 | SW1, SW2, SW3 |
| 2 | 12-23C/RSGHBHW-5V01/2C 12-23C_RSGHBHW-5V01_2C Everlight Electronics Co Ltd | LED_12-23C_RSGHBHW-5V01_2C | D1, D2 |
| 1 | 19-C47/RSGHBHC-5V01/2T 19-C47_RSGHBHC-5V01_2T Everlight Electronics Co Ltd | LED_19-C47_RSGHBHC-5V01_2T | D3 |
| 2 | CL21A226MQQNNNE 0.1uF | C_0402_1005Metric | C1, C3 |
| 1 | CL21A106KOQNNNE 0.1uF | C_0402_1005Metric | C2 |
| 1 | RC0402FR-0766K5L 33 | R_0402_1005Metric | R1 |
| 1 | RC0402FR-07100KL 33 | R_0402_1005Metric | R2 |
| 1 | RC0402FR-1391KL 33 | R_0402_1005Metric | R3 |
Ss front panel design files
The KiCad project lives in the loopj/short-stack repository on GitHub; these links point at the commit this page was built from.
Ss front panel: common questions
How big is the Ss front panel PCB?
The Ss front panel measures 63.3 × 15 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the Ss front panel?
13 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ss front panel design files?
From the loopj/short-stack repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ss front panel design in my own project?
It is published under SHL-2.1, which limits how it may be reused; read the license before building on it.
