Steam badge
MakersAsylumIndia·steam_badge·badge_kicad/badge.kicad_pcb
About the Steam badge PCB
Steam badge is an open source PCB design by MakersAsylumIndia, published on GitHub. It is a 2-layer board measuring 77.5 × 39.4 mm, with 19 components from 13 distinct parts.
By type, the board carries 6 connectors, 4 resistors, 3 inductors, 2 diodes, 1 transistor and 1 battery holder.
It belongs with the wearables designs in this gallery.
From the project
learn to solder blinky LED badge for S.T.E.A.M. school season 2 at Maker's Asylum
1. Two LED's with series current limit resistors 2. One CR2032 Coin Battery 3. Use red, green blue or White LEDs or whatever you choose 4. Use Blinking LEDs 5. Replace Resistor with LDR to have light controlled brightness 6. Learn SMD chops by using 0805 resistors 7. Badges can be "tiled" 8. Add acrylic piece with your laser engraved name and it can be edge lit by the LEDs to make a personalized name tag
Steam badge bill of materials (BOM)
19 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2N2222 | TO-92_Inline_Wide | Q1 |
| 6 | Pin | MTG_1mm5 | P1, P2, P3, P4, P5, P6 |
| 1 | BATT_1 | cr2032_02 | BT1 |
| 1 | JMP | Pin_Header_Straight_1x03 | JP1 |
| 1 | ON | switch_MJTP1250 | SW1 |
| 1 | Red | LED-5MM | D1 |
| 1 | Grn | LED-5MM | D2 |
| 1 | Make | make3 | L2 |
| 1 | Break | break3 | L3 |
| 1 | Create | create3 | L4 |
| 2 | 100E | r_0805 | R1, R2 |
| 1 | LDR | Resistor_LDR_5.0x3.4 | R3 |
| 1 | 47k | r_0805 | R4 |
Steam badge design files
The KiCad project lives in the MakersAsylumIndia/steam_badge repository on GitHub; these links point at the commit this page was built from.
Steam badge: common questions
How big is the Steam badge PCB?
The Steam badge measures 77.5 × 39.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Steam badge?
19 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Steam badge design files?
From the MakersAsylumIndia/steam_badge repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Steam badge design in my own project?
The repository has no license, so all rights stay with MakersAsylumIndia. Use it as a reference, and ask the author before reusing the design.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k