Evap-Coil-Driver
matterwaves·Evap-Coil-Driver
About the Evap-Coil-Driver PCB
Evap-Coil-Driver is an open source PCB design by matterwaves, published on GitHub. It is a board, with 26 components from 19 distinct parts.
Other key parts include the AD8603, INA823 and ACPL-214-500E. By type, the board carries 9 resistors, 3 ICs, 3 transistors, 3 diodes, 2 battery holders and 2 capacitors.
From the project
Coil Driver design for evaporation coils in Cavity AI Pendulum
Main components on the Evap-Coil-Driver
Evap-Coil-Driver bill of materials (BOM)
26 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AD8603 | TSOT-23-5 | U1 |
| 1 | INA823 | U2 | |
| 1 | ACPL-214-500E | SOP-4_4.4x2.6mm_P1.27mm | U3 |
| 2 | IXGN320N60A3 | Q1, Q3 | |
| 1 | IXGN320N60A3 | Q2 | |
| 1 | 20m | 195M20 | |
| 1 | CCPF-500-XX CCPF-1500-XX | BT1 | |
| 1 | B1 | BT2 | |
| 2 | B72240B07050K001 | RV1, RV2 | |
| 1 | SD36_SOD323 | D_SOD-323 | D1 |
| 1 | Q_SCR_AGK | D2 | |
| 1 | D | D4 | |
| 1 | 722U 722u | L1 | |
| 1 | 562U 420u | C1 | |
| 1 | C | C2 | |
| 6 | R | R1, R2, R3, R5, R7, R9 | |
| 1 | 50 | R4 | |
| 1 | 10M 100u | R6 | |
| 1 | 47.1M 47.1m | R8 |
Evap-Coil-Driver design files
The KiCad project lives in the matterwaves/Evap-Coil-Driver repository on GitHub; these links point at the commit this page was built from.
Evap-Coil-Driver: common questions
How many components are on the Evap-Coil-Driver?
26 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Evap-Coil-Driver design files?
From the matterwaves/Evap-Coil-Driver repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the Evap-Coil-Driver design in my own project?
The repository has no license, so all rights stay with matterwaves. Use it as a reference, and ask the author before reusing the design.