Star Wars Vector
About the Star Wars Vector PCB
Star Wars Vector is an open source PCB design by Mazamars312, published on GitHub. It is a 2-layer board measuring 292.1 × 525.8 mm, with 284 components from 100 distinct parts.
By type, the board carries 84 resistors, 71 capacitors, 6 transistors, 3 inductors, 2 connectors and 1 LED.
From the project
Analogue_Star_Wars
Star Wars Vector bill of materials (BOM)
284 components, 100 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 2N3904 | GenericTrans | Q1, Q4, Q5, Q6, Q7 |
| 1 | 2N3906 | GenericTrans | Q8 |
| 1 | Main_Connector | J17 | J17 |
| 1 | Edge_Connector_30_Pin | J20 | J20 |
| 25 | TP | TEST_POINT | 6MHZ1, 12MHZ1, +5V1, +5V2, +12V1, -15V1, BLUE1, GND1 +17 |
| 1 | TP1 | TEST_POINT | +15V1 |
| 2 | AM6012 | DIP20 | AB_6, E_6 |
| 2 | LS08 | DIP14 | A_1, H_2 |
| 1 | LS20 | DIP14 | A_2 |
| 2 | LS00 | DIP14 | A_3, E_4 |
| 1 | LS157B | DIP16 | A_4 |
| 6 | LS194 | DIP16 | A_5, B_5, C_5, F_5, H_5, H_6 |
| 5 | 082 | DIP8 | A_7, BC_8, BC_9, D_7, F_9 |
| 4 | LS161 | DIP16 | B_1, B_2, C_1, D_1 |
| 1 | LS174A | DIP16 | B_3 |
| 1 | S129 | DIP16 | B_4 |
| 2 | LF13201 | DIP16 | B_7, E_7 |
| 1 | 1N914 | GenericComp | CR1 |
| 2 | 1N100 | GenericComp | CR3, CR4 |
| 1 | LS11 | DIP14 | C_2 |
Show 80 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LS175_A | DIP16 | C_3, M_5 |
| 1 | LS157A | DIP16 | C_4 |
| 3 | LS74 | DIP14 | D_2, H_1, K_5 |
| 2 | LS42 | DIP16 | D_3, K_2 |
| 1 | LS14 | DIP14 | D_4 |
| 1 | DAC_8 | DIP16 | D_6 |
| 4 | LS02 | DIP14 | E_1, E_3, H_3, M_8 |
| 2 | LS32 | DIP14 | E_2, J_5 |
| 1 | LS273A | DIP20 | E_5 |
| 1 | LS27 | DIP14 | F_1 |
| 1 | LS109 | DIP16 | F_2 |
| 1 | S260 | DIP14 | F_3 |
| 1 | LS86 | DIP14 | F_4 |
| 1 | LS273B | DIP20 | F_6 |
| 1 | DAC_8A | DIP16 | F_8 |
| 1 | LS175 | DIP16 | H_4 |
| 1 | AVG | DDIP40 | J_2 |
| 1 | Spare7 | DIP18 | J_3 |
| 1 | Spare9 | DIP18 | J_4 |
| 1 | LS10 | DIP14 | J_6 |
| 1 | LS245 | DIP20 | K_1 |
| 1 | Spare6 | DIP18 | K_3 |
| 1 | Spare8 | DIP18 | K_4 |
| 2 | LS04 | DIP14 | K_6, P_5 |
| 1 | 2732_A | DDIP24 | L_1 |
| 1 | Spare5 | DIP16 | L_2 |
| 6 | 137211-001 | DDIP24 | L_3, L_4, M_3, M_4, P_3, P_4 |
| 1 | LS175C | DIP16 | L_5 |
| 1 | LS175B | DIP16 | L_6 |
| 1 | 74LS07 | DIP14 | L_8 |
| 2 | LS244_B | DIP20 | M_1, M_2 |
| 1 | LS191A | DIP16 | M_6 |
| 1 | LS244_A | DIP20 | N_1 |
| 1 | LS244_C | DIP20 | N_2 |
| 1 | LS164 | DIP14 | N_8 |
| 1 | LS244 | DIP20 | P_1 |
| 1 | Spare4 | DIP16 | P_2 |
| 1 | Spare10 | DIP14 | P_6 |
| 1 | Spare1 | DIP16 | P_8 |
| 2 | VDR | GenericComp | RV1, RV2 |
| 2 | Split_Pad | SplitPad | SP1, SP2 |
| 1 | L7815_ | VoltReg | VR1 |
| 1 | L7915_ | VoltReg | VR2 |
| 1 | LED | LED | CR2 |
| 3 | 1uH | Inductor1 | L1, L2, L3 |
| 53 | .1uF | GenericComp | C1, C2, C3, C6, C7, C9, C10, C11 +45 |
| 2 | .01uF | SmallCap | C4, C21 |
| 2 | .01uF | GenericComp | C5, C41 |
| 2 | .047uF | CapYellow | C8, C25 |
| 3 | 150pF | CapBrown | C37, C47, C66 |
| 1 | 39pF | CapBrown | C38 |
| 1 | 10pF | CapBrown | C42 |
| 4 | 100uF | LargeCap | C43, C44, C46, C81 |
| 2 | 22uF | CapElec2 | C45, C48 |
| 1 | 22pF | CapBrown | C83 |
| 14 | 10K | GenericComp | R1, R2, R3, R4, R5, R6, R7, R8 +6 |
| 2 | 12K | GenericComp | R11, R16 |
| 1 | 24K | GenericComp | R12 |
| 1 | 47K | GenericComp | R13 |
| 5 | 820 | GenericComp | R14, R26, R27, R54, R55 |
| 9 | 100K | GenericComp | R15, R98, R99, R100, R101, R102, R103, R104 +1 |
| 1 | 6.2K | GenericComp | R17 |
| 3 | 470 | GenericComp | R20, R21, R22 |
| 3 | 4.7k | GenericComp | R23, R24, R25 |
| 10 | 7.5K | GenericComp | R30, R31, R58, R85, R86, R89, R93, R95 +2 |
| 4 | 10K | PotBlue | R41, R44, R68, R71 |
| 2 | 150K | GenericComp | R42, R69 |
| 2 | 2.7K | GenericComp | R43, R70 |
| 2 | 6.8K | GenericComp | R45, R72 |
| 2 | 22K | GenericComp | R46, R73 |
| 2 | 2K | PotBlk | R47, R74 |
| 7 | 100 | GenericComp | R51, R78, R90, R94, R114, R115, R116 |
| 2 | 1.30K | GenericComp | R75, R76 |
| 1 | 15K | GenericComp | R81 |
| 4 | 1K | GenericComp | R82, R109, R110, R111 |
| 1 | 560 | GenericComp | R84 |
| 2 | 6.19K | GenericComp | R87, R91 |
| 2 | 200 | PotBlk | R88, R92 |
| 1 | 3.9K | GenericComp | R97 |
| 1 | 150 | GenericComp | R107 |
Star Wars Vector design files
The KiCad project lives in the Mazamars312/Analogue_Star_Wars repository on GitHub; these links point at the commit this page was built from.
Star Wars Vector: common questions
How big is the Star Wars Vector PCB?
The Star Wars Vector measures 292.1 × 525.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Star Wars Vector?
284 components, from 100 distinct parts. The full bill of materials is listed on this page.
Where can I download the Star Wars Vector design files?
From the Mazamars312/Analogue_Star_Wars repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Star Wars Vector design in my own project?
The repository has no license, so all rights stay with Mazamars312. Use it as a reference, and ask the author before reusing the design.
