HardLabs

DeeJ-Audio-Controller

McNik1997·DeeJ-Audio-Controller-PCB

DeeJ-Audio-Controller PCB layout, top view — open source AVR/Arduino board by McNik1997

About the DeeJ-Audio-Controller PCB

DeeJ-Audio-Controller is an open source AVR/Arduino PCB design by McNik1997, published on GitHub. It is a 2-layer board measuring 73 × 100 mm, with 12 components from 4 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. By type, the board carries 5 diodes, 1 module and 1 capacitor.

It belongs with the audio designs in this gallery.

From the project

PCB design for DeeJ by omriharel

Main components on the DeeJ-Audio-Controller

Arduino_Nano_v3.x

DeeJ-Audio-Controller bill of materials (BOM)

12 components, 4 distinct parts.

QtyPartRefs
1
Arduino_Nano_v3.x
A1
5
~
Double_Slider_Potentiometer1, Double_Slider_Potentiometer2, Double_Slider_Potentiometer3, Double_Slider_Potentiometer4, Double_Slider_Potentiometer5
5
WS2812B
D1, D2, D3, D4, D5
1
0.1uF
C1

DeeJ-Audio-Controller design files

The KiCad project lives in the McNik1997/DeeJ-Audio-Controller-PCB repository on GitHub; these links point at the commit this page was built from.

DeeJ-Audio-Controller: common questions

What microcontroller does the DeeJ-Audio-Controller use?

The DeeJ-Audio-Controller is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the DeeJ-Audio-Controller PCB?

The DeeJ-Audio-Controller measures 73 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DeeJ-Audio-Controller?

12 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the DeeJ-Audio-Controller design files?

From the McNik1997/DeeJ-Audio-Controller-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the DeeJ-Audio-Controller design in my own project?

The repository has no license, so all rights stay with McNik1997. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the DeeJ-Audio-Controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards